PNSHAR Internal bond strength tester

1. Instruction:
This is PNSHAR Internal bond strength tester
The PNSHAR Internal bond strength tester is designed to determine the internal bond strength of a variety of paper and board materials according to TAPPI T 569. The instrument design is based on a falling pendulum which creates a high speed impact on a paper specimen. The paper specimen is sandwiched between two double-coated tape substrates. The pendulum impacet measures the total energy required to delaminate the internal fibers of a specimen in a "Z" type direction into two separate piles. The system also incorporates an automatic sample preparation station which allow five specimens to be accurately prepared simultaneously.

2. Features:
1) Selectable units(ft. Lb/in2, J/m2. )
2) Report printout with built-in printer
3) Automatic calibration
3. Applications:
Newsprint, Fine paper, Liner board, Bookstock, Carton board, Medium, Coatings, Laminates.
4. Standards: TAPPI T 569 and GB/T 262034.
5. Specifications:
1) POWER: AC 220V 50HZ
2) Test angle: 90°
3) Results directly in: Lb-ft/in² , J/M2
4) Ranges: A: 20-500J/M2, B: 500~1000J/M2
5) Dimensions(WxDxH): 70cm× 34.5cm× 63cm 92KG