Products

Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube

China Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube, Find details about China Power Supply, Laser Power Supply from Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube

Model NO.
DY-13
Application
for Reci Laser Tube W4
Mtbf
>=10000hours
Cooling
Forced Air Cooling
AC Frequency
47-440Hz
Trademark
Dragondiamond
Transport Package
Carton
Specification
power: 550w
Origin
Guang Dong(China)
Model NO.
DY-13
Application
for Reci Laser Tube W4
Mtbf
>=10000hours
Cooling
Forced Air Cooling
AC Frequency
47-440Hz
Trademark
Dragondiamond
Transport Package
Carton
Specification
power: 550w
Origin
Guang Dong(China)
DY13 100w Laser Power Supply For Reci W4/S4/Z4 Laser Tube
Power supply
DY13
Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube
Specification

Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube
Product Showcase
Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube
Operation Instruction
1. Laser Tube connection: (Refer to Power supply and laser Device's connection Diagram) High voltage terminal of HY-DY13 power supply should be connected to the positive pole of CO2 laser device. Current circuit of the power supply shall be connected to negative pole (laser output terminal) of laser device, through an ampere meter or directly.
2.Connection of control signal( Refer to Power supply and control board's connection Diagram) The control signal shall be reliably connected to control terminal of the power supply HY-DY13,after connecting the DAC output signal and TTL signal of external computer with the power supply, the laser device shall work as expected. If the laser lamp can not work properly, should check the control signal whether correct or not(include check the voltage specification and logic),if use PWM control as power control,make sure f≥20KHz,Amplitude (peak value) ≤5V,Check and protection switch WP connection is correct at same time.
3.Voltage of power input: HY-DY13's power input of the power supply shall be 220VAC/50Hz. If 110VAC required please specify when placing order.
4.  Others: A group of protection switches are also reserved for detection of water switch, fan switch,open-enclosure protection and so on.  
Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube


Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube

Dy13 100W Laser Power Supply for Reci W4/S4/Z4 Laser Tube

Please feel free to contact us for more information!
 
 
Web: dragondiamondcnc.en.made-in-china.com
CNC Router/Laser Engraving Cutting Marking Machine/Plasma Cutting Machine

You Might Also Like