SD32 320hp 34t one shank back ripper SHANTUI bulldozer hydraulic crawler dozerI.Main Specification
Engine: Brand:CUMMINS NTA855-C360S10 Model: NTA855-C360S10 320HP Type: Turbocharged, intercooled, in line , 4-cycle Number of cylinders-bore * stroke: 6-139.7*152.4mm Piston displacement: 14010ml Rated revolution:2000r/min Max torque: 1440N.m Fuel consumption: 245g/kw.h Start motor: 24V, 11kwAlternator: 28V, 35ABattery: 24V(12V*2)-195AHFuel system: PT pump head valve direct injectionGovernor: Centrifugal , all speed governorCooling system: Forced circulation by centrifugal pump, busher tyre fanAir cleaner: Dry, horizontal type with air cleanerTRAVEL SPEEDGear | 1st | 2nd | 3rd |
Forward (km/h) | 0-3.6 | 0-6.6 | 0-11.5 |
Reverse (km/h) | 0-4.4 | 0-7.8 | 0-13.5 |
WORKING EQUIPMENT AND ATTACHMENTDozer | Straight-tilt: Hydraulically actuated with servo valve |
Blade supporting method | Brace type tilt cylinder on right side |
Blade width(mm) | 4130 |
Blade height(mm) | 1590 |
Max.lift above ground (mm) | 1560 |
Max.drop below ground (mm) | 550 |
Max.tilt adjustment(mm) | 1000 |
TRANSMITTING SYSTEM Torque converter: torque converter, 3-element,1-stage,1-phase Cooling method: water-cooled Transmission: Planetary gear, multiple - disc clutch , hydraulically connected forced lubrication by gear pump Main-drive shaft : Spiral bevel gear , Splash lubrication, single-stage speed reduction FINAL DRIVE Final drive: 2-stage spur gear, speed reduction, splash lubrication STEERING SYSTEM Steering Clutch:Wet type, multi-disc, spring loaded, hydraulically separated , hand and hydraulic control operated. Steering brake: Wet type, band brake, foot operated (with hydraulic booster , interconnected with clutch) UNDERCARRIAGE SYSTEM Suspension: Swing type of sprayed beam, suspended structure of equalizer bar No of Carrier rollers(each side): Two No of Track rollers(each side): Seven (single flange 5, double flange 2) No of Idler(each side):One TRACK SHOE Assembled type: single tooth Pitch: 228.6mm Width:560mm Tooth height: 80mm No of track shoes: 41 (each side) Track gauge: 2140mm Ground pressure: 0.105MpaHYDRAULIC CONTROL SYSTEM Max.pressure: 14MPa Pump type: Gear pump Displacement: 335.5L/min (1800rpm)(at revolution of 2000 rpm) Control valve type: Guiding valve Hydraulic tank: Control valve and oil filter inner-installed type Bore of working cylinder(mm) x NO: Φ120 x 2 (double-acting type)3-SHANK RIPPER Max digging depth: 542mm Max lift above ground: 883mm Standard digging angle: 45°(variable within range between 35°- 63°) Max digging depth of single ripper: 1250mm Max lift above ground: 965mm Weight of single ripper(Kg):3243 COOLANT AND LUBRICANT CAPACITY Cooling water:121L Fuel tank: 600L Engine: 47L Bevel gear case: 185L Final drive case(each side): 55L Hydraulic tank: 164LWEIGHT Operating weight:37200kg With multi-ripper:40975kgOVERALL DIMENSIONS Length x Width x Height (ripper not included) (mm): 6880x4130x3725 II.Company InformationShantui series bulldozers include 12 horsepower grades, i.e. 520, 420, 320, 240, 230, 220, 200, 160, 130, 110, 100 and 80, and include variant products, such as standard type, wet-land type, super wet-land type, desert type, plateau type, coal bulldozing type, forest lumbering type and environmental sanitation type. Bulldozers of various models can be configured with any of the following ancillary devices, such as direct dumping blade, angle blade, U-shaped blade, environmental sanitation blade, air conditioning cab, anti-rolling cab, simple cab, tripe-teeth ripper, single-tooth ripper, winch and carry scraper. The bulldozers are mainly used to working conditions including airport, road, mine, dam, railway, etc.III.Bulldozer Working
IV Oversea ServiceService
1). Special design according to your special demand
2). Original spare parts order on line through our website freely
3). Complete technical instruction books help you to operate the machine and make maintenance easily.
4). On line and on site training or service. We welcome our dealers to send their engineers to China for annual service training. Meanwhile, we also send out our own engineers to foreign countries for train and service .
V.Social ResponsibilityThe road in the disaster area were destroyed seriously due to the earthquake, Our company will fitst time to start the contingency plans to support the disaster area.
VI. PackingWe usually choose the RO-RO vessel or the Bulk Cargo Vessel to transport our machine.VII. DEALING PROCESS1. You send us an inquiries on your desired trailer through our contact information.
2. We shall reply you in 12 hours after we received our inquiry.
3. We will negotiate the detail of the trailer on your requirement.
4. Confirmed on the tech data.
5. Sign contract.
6.30% down payment or LC issuing.
7. Production
8. The Manufacturig process with updated news.
9. The Production completement.
10.Balance payment .
11.Arrange Shipment and Custom Clearance
VIII. Original Spare PartsWe supply the original Spare Parts. With a complete after-sales service system, the After-market Division provides excellent service, and uses streamlined supply chain to provide rapid parts delivery.