Products

Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck

China Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck, Find details about China Water Fire Fighting Truck, Fire Truck from Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck

Fuel
Diesel
Drive Wheel
4×2
Horsepower
150-250hp
Condition
New
Trademark
Sinotruk howo
Transport Package
Nude
Specification
8205× 2485× 3375mm
Origin
China
HS Code
8503009090
Fuel
Diesel
Drive Wheel
4×2
Horsepower
150-250hp
Condition
New
Trademark
Sinotruk howo
Transport Package
Nude
Specification
8205× 2485× 3375mm
Origin
China
HS Code
8503009090

Sinotruk Howo 8 ton 10 ton water tank fire truck is modified from Sinotruk Howo ZZ5207N4617E1 chassis. The vehicle consists of two parts: firefighter cabin and body. The cabin is changed from single row to double row. It can take 2+4 people. The car has an exposed tank structure. The front of the body is an equipment box, and the middle is a water tank. Department is the pump room.
The carrier tank is made of high-quality carbon steel, with epoxy primer and epoxy asphalt paint sprayed inside. It is elastically connected to the chassis and has a water capacity of 8000L. It is equipped with CB20.10/30.60 medium and low pressure fire protection produced by Shanghai Xiongzhen Fire Equipment Co., Ltd. The pump has a rated flow of 60L/S and the roof is equipped with a PS60W vehicle fire monitor produced by Chengdu West Fire Fighting Machinery Co., Ltd.

Product Specifications:

 
Vehicle modelCLW5204GXFSG80 type water tank fire truckChassis modelZZ5207N4617E1
engineSinotruk 280 Power Engine/206KWEmission StandardsEruo 3
Outside dimensions8205×2485×3375mmWheelbase4600mm
Carrier volume8000LTank size2345×2400×1415
Fire PumpShanghai Xiongzhen CB10/60Fire cannonChengdu West PS60
Fire pump rated flow60L/s 1.0MPaEnvironmental protection/exemptionYes/To be released
Rated flow of fire monitor60L/s 1.0MPaFire gun rangeWater≥70m
other:Brake system: service brake system, dual-circuit air pressure brake: parking brake, spring energy storage brake: auxiliary brake, engine exhaust brake. Minimum turning radius ≤19m
Overall layout: The vehicle consists of two parts: the firefighter's cabin and the body. The body is arranged in a three-piece structure. The front part is the equipment box, the middle part is the water tank, and the rear part is the pump room. The tank body is a parallelepiped box-type container. tank.
PTOStructure and formIntegral box type, full power, sandwich type, forced adjustable circulating water cooling, splash oil lubrication
CabStructure typeThe overall four-door double-row flat head, additional crew room, a total of 6 people can be seated, the driver position is left
Equipped with fire-fighting facilitiesThe instrument panel of the original car is equipped with a fire control instrument panel and a police light control box, which is equipped with 1. an alarm; 2. a power take-off control switch and an indicator lamp; 3. an additional power switch;
Equipment boxStructure and formThe main frame structure is welded with high-quality square tubes, and the outer decorative plate is welded with carbon steel plates. The roof is non-slip and can be walked on. (Aluminum alloy square tube welding can be used according to user needs)
Equipment boxThe equipment box is located at the rear of the passenger compartment, with aluminum alloy rolling doors on both sides and lighting lamps inside. Storage boxes are set in the equipment box room according to demand. The side skirt is equipped with a tool box and a roller shutter door, where small tools can be placed.
ContainerMaterialHigh-quality carbon steel with a thickness of 5mm (can be made of stainless steel and PP according to user needs)
JugManhole: one DN460 manhole, with quick lock/open device
overflow port: one DN65 overflow port, one
surplus water outlet: one DN40 water tank for surplus water outlet, and a ball valve
water inlet: in the water tank Connect a DN80 interface
water inlet and outlet on the left and right sides : set a water tank to the water inlet pipe of the pump, DN150 valve, pneumatic and manual control, set a water pump to the water tank filling pipe, DN65 valve, pneumatic and manual control
Foam tankManhole: one DN460 manhole, with quick lock/open, automatic pressure relief device
overflow port: one DN40 overflow port one
excess liquid port: one DN40 foam tank to discharge excess liquid
port :Set a DN40 foam tank to the water pump out of the foam tube
VolumeWater tank: 8000kg
Pump roomStructure and formThe pump room is located at the rear of the vehicle, with aluminum alloy rolling doors on both sides and the back, with lights inside, and some common equipment can be placed on both sides of the pump room
Equipped with fire-fighting facilitiesWater filters, water collectors, water distributors, water guns, reducers, suction pipe wrenches, etc., can also be equipped according to special needs: such as hand-lifted motor pumps, fuel heaters, etc.
LadderLadder and handleThe rear ladder is made of aluminum alloy two-section flip ladder. It is not more than 350mm away from the ground when in use. The handle on the car is made of non-slip round steel pipe with grooved surface and the surface is sprayed with plastic.
Fire PumpmodelCB20.10/30.60 type medium and low pressure vehicle fire pump
Structure and performancestructureAtmospheric centrifugal
performanceLow pressure60L/s @1.0MPaDiversion time ≤50, the maximum suction depth is 7m
Medium pressure30L/s @2.0MPa
Water diversion deviceBuilt-in sliding vane pump
Fire cannonmodelPS60WRange Water≥70m
flow60L/S
Maximum elevation/depression angle: Depression angle ≤-15°, elevation angle ≥+45°
Rotation angleWater and foam dual purpose fire monitor, 360° horizontal rotation
Piping systemPipe materialHigh-quality seamless steel pipe
Suction pipeThere is a DN150 suction port on the back side of the pump room
Water injection lineThere is a DN80 water injection port on the left and right sides of the water tank, and a DN65 water pump is installed in the pump room to inject water into the tank
Outlet pipeThere are 2 DN65 and 1 DN80 water outlets on the left and right sides of the pump room, with shut-off valve and ampoule
Cooling water pipelineCooling water pipeline and control valve with cooling power take-off
Electrical systemAdditional electricalSet up an independent circuit
Auxiliary lightingFiremen's room, water pump room and equipment box are equipped with lights respectively, and lighting and indicator lights are set on the control panel
Strobe lightInstall red and blue strobe lights on both sides of the body
Warning deviceLong row of red warning lights, installed on the top of the cab. Siren, the control box is under the driver's front
Fire field lightingInstall a 35W fire searchlight at the back of the jacket
Control systemCab controlWater pump disengagement, warning light alarm, lighting and signal device control, etc.
Pump room controlBodywork main power switch, parameter display, status display
Optional partWith sprinkler function: front flushing, rear sprinkling; rear roof lighting; standard CB10/60 type normal pressure pump, optional CB20.10/30.60 medium and low pressure pump, etc.




Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck
Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck
Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck
Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck
Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck


Customer visit:

Sinotruk HOWO 8 Ton 10 Ton Water Tank Fire TruckSinotruk HOWO 8 Ton 10 Ton Water Tank Fire Truck

FAQ 3: How about the after sale service?
        A: First we choose the popular brand in local market with after sale service. Second, we can delivery spare parts 
            and engineers to your place. Make maintenance plan and provide commissioning service.
FAQ 4: How about gurantee and warranty?
        A: We provide 16 years spare parts service for exporting vehicles, warranty one year from B/L date.
            Warranty of special model vehicle will be negotiated.
 

You Might Also Like