Products

Weld Machine for Lithium Battery Spot Welder

China Weld Machine for Lithium Battery Spot Welder, Find details about China Weld Machine, Spot Welder from Weld Machine for Lithium Battery Spot Welder

Maximum Current
20kVA
No-Load Voltage
8V
Input Voltage
200VAC
Display
LCD Display
Cylinder Diameter
20mm
Maximum Working Stroke
600mm
Welding Arm Length
120mm
Welding Pin Length
1.7*84mm
Welding Point Adjustable Range
2mm-10mm
Trademark
Better
Specification
800*800*1280
Origin
China
Maximum Current
20kVA
No-Load Voltage
8V
Input Voltage
200VAC
Display
LCD Display
Cylinder Diameter
20mm
Maximum Working Stroke
600mm
Welding Arm Length
120mm
Welding Pin Length
1.7*84mm
Welding Point Adjustable Range
2mm-10mm
Trademark
Better
Specification
800*800*1280
Origin
China
Spot welder 
 

1 Main performance and advantages:
1.1 Application range:
Application:Power tool battery, power reserve battery, electric bicycle battery, solar battery, electric car battery, electric motorcycle battery, low-speed car battery, vacuum cleaner battery, electric wheelchair battery, drone battery, airplane and ship battery, sprayer battery, mowing Welding of lithium battery products such as machine batteries, medical equipment batteries, military batteries, etc.
1.2 Application range of lithium battery
Cylindrical battery(18650,26650,32650,32700), Button batteries, prismatic batteries, soft-pack batteries, nickel-metal hydride nickel-cadmium, alkaline batteries.
1.3 Performance and advantages:
1) Single-chip computer control, LCD display screen, simply operation. Two-stage discharges ensure the consistency and reliability of battery welding.
2) Error alarm. When the equipment has insufficient air pressure, there will be a red alarm prompt on the panel; when the equipment is overheated, there will be a red alarm prompt on the panel; when the equipment has a circuit board failure, there will be a red alarm prompt on the panel.
3) The discharge time is in units of one pulse.
4) Adopt foot switch control.
5) Equipped with casters,which is convenient to move and adjust the horizontal position.
2 Technical Parameters:
2.1 Welding power supply introduction:
Automatic standard welding power supply (this power supply is independently developed, designed and manufactured by the company, and the software has been protected by national intellectual property registration)

2.2 Welding power supply 1 set/set (two-stage discharge, power 20 kW):
LCD screen display is easy to operate, AC output is 8V, weilding point are high consistency, automatic alarm, high integration of main control boardand and easy to maintain.
2.3 Welding tension:
Thickness of the nickel sheet is 0.15, the welding tension will be greater than 6 kg.
2.4 Welding power parameters:
Electrical parameters:
Maximum current20KVA
No-load voltage8V
Input voltage220VAC
Transformer rated capacity18KVA
Power parameters:
Input voltage200-240VAC
 Primary current25-60A
Power frequency50-60HZ
Power plug3 LEGS
Secondary current:
Secondary short circuit current8000A
Power factor0.5%
Welding control:
Pre-welding pulse number0-99
Welding pulse number0-99
Welding energy level0-999
Power fluctuation range+30-40V
Buffer time adjustment range0.2 second *8
LCD displayLCD
Main control chip MPU
Memory chipEEPROM
Operation modeFoot switch
Welding head:
Cylinder diameter20mm
Maximum working stroke600mm
Welding arm length120mm
Welding pin length1.7*84mm
Welding point adjustable range2mm-10mm
Working desk size800*800*1280mm
Working desk height adjustable range0-120mm
Welding head structureadopt independent single cylinder with double spring control
Pneumatic control:
 
Maximum pressure of compressed air7kg
 Minimum working pressure25-60A
Air consumption/1000 strokes4300 Cubic centimeter
Gas connectorQuick connect plug
Optional plug 5/16 BSP
Cooling method: The welding machine equipped with cooling fan
Dimension: 800(w)*800(d)*1280(h)mm
Total weight: 80kg
2.5 Air pressure:
0.3Mpa, when using the air source, there must be a filter device to ensure that the air flow is free of water and impurities.
2.6 Working stroke:
600mm
2.7 Suitable nickel sheet width:
4 -10mm
2.8 Suitable nickel sheet thickness:
0.1mm - 0.2mm (Diversion groove) , diversion grooves and bumps must be done when the nickel sheet reaches more than 0.25mm. To use the automated welding, you must confirm that the nickel sheet direction of the opening and the height of the bump meets the requirements of automated welding. To ensure the effective of welding.
2.9 Productivity:
The spot welding time of the battery welding side (positive or negative) is 0.5 seconds, (this is an example, the specific depends on the customer's production requirements) does not include the time to install the battery, nickel sheet and fixture.
2.10 Operation panel:
Simple equipment debugging, easy to opera
2.11 Welding head power:
SDA32X15-S cylinder. The welding head has high processing accuracy and adopts Korean high-density steel. The spring has a good balance and does not damage the internal structure of the battery during welding.
2.12 Welding pin:
The welding pin is imported aluminum oxide copper, standard size is 1.7mmX85mm.
2.13 Welding effect:
Good welding consistency, the welding points are nice.
 2.14 Control device and main configuration:
Omron micro switch, Airtac sensor and its pneumatic components. The screw guide rail is made of Taiwan Hiwin.
2.15 Require of nickel sheet:
Customers customize nickel sheet specifications according to their own product requirements. When necessary, the nickel sheet needs to open diversion grooves and bumps at the welding position. The jig is made according to the width and shape of the nickel sheet.
 

Weld Machine for Lithium Battery Spot Welder
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Company Profile 

Better(Xiamen) power technology co.,ltd is a professional lead-acid battery equipment manufacturer and complete equipment supplier.Our technical team is composed of excellent mechanical engineers and experts in storage batteries.With rich experience in battery manufacturing and mechanical manufacturing in the lead-acid battery industry for more than 30 years,we provide customers with high-end lead-acid battery manufacturing equipment and turn-key solutions for complete equipment, including plate manufacturing - assembling - formation charge - clean and environmental protection system.Also, we can provide raw materials for battery production,battery factory designs, battery product designs and tooling, battery manufacturing technology support, and production management guidance & consultancy for battery manufacturers.

Through the outstanding technology, innovative high-quality after-sales service, perfect supply chain, we expand our business into more than 60 countries around the world and serve more than 200 customers. We have been constantly developing, dedicated to becoming a trusted partner to our customers.

We are looking forward to working with you and creating miracles in the future!

                      
 

You Might Also Like