75t Double Girder Gantry Crane for Handling Steel Rods MG Gantry CraneOur Designed MG Gantry cranes can lift heavy loads up to 700t. Its spans can be over 50 meters. For fabrication and freight-transfer applications, it can move loads rapidly and smoothly.
Mechanical:
-Double main girder, welded box beam
-Material: carbon steel with high quality of Q235B or Q345B
-The main girder is connected by strength bolt.
-Weld joint tested by X ray or ultrasonic examination;
-Forged Crane wheels
-Trolley with Compact structure, small size and light;
-Lifting mechanism is rigid open winch trolley
-Compacted gear motor driving, harden gear, hydraulic brake
-Excellent driving properties, smoothly moving
-Shot-blasting Sa2.5 for complete girder after welding, stress release
-Epoxy zinc rich high quality painting, 2x2 with 140μm
Electrical :
-Conductor power supply
-All hoist and crane movements are independent and can be run simultaneously.
-Protection degree IP55
-The components are positioned in a maintenance friendly way, and the whole layout provides with good protection
-Festoon cables are suspended on cable saddles, fixed to cable trolleys, running in a galvanized C-track.
Protective Features:
- Overload Limiter, Limit Switch (Lifting and Traveling), Interlock protection device, Buffer, Rail clear plate, Protective cover, Bus Bar preventer plate, Anti-collision device, Light alarm devices Main isolating switch, Emergency stop system, Motor overload protection
-Equipped with rainproof devices for lifting mechanism, electrical control box.
Technical Data:MG Double Girder Gantry Crane |
Capacity(t) | 5t~700t as per requirements |
Span(m) | 7m~60m, or other special span |
Lifting Height(m) | 6m~24m or other specail height |
Lifting Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) |
Trolley Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) |
Bridge Speed(m/min) | single lifting speed or stepless speed(designed as per requirements) |
Working Duty | A5~A8 depends on application |
Power supply | 380V,50Hz or other |
| | | | |
Crane Inquiry Data Sheet |
Nos. Crane required | |
Capacity | Main Hook | | Aux. hook | |
Span of the Crane | |
Required Hook Lift | Main Hook | | Aux. hook | |
Length of Runway | |
Working Ambient | | | | |
Working Duty | Using Frequency | |
Application | | | | |
Power Supply | Volts Hz Phase |
Control Method | cabin | | floor | |
wireless | | other | |
Products Range: