Jonyang China Jyl619e 20t Wheel Excavator, Find details about China Excavators, Excavator from Jonyang China Jyl619e 20t Wheel Excavator
Specifications | JYL619E |
OperingWeight(Tons) | 20 |
Standard bucker Capacity(m³) | 0.8 |
Engine manufacturers | Cummins |
Engine type | 6B-5.9 |
Engine power(kw) | 129 |
Hydraulic flow(L/min) | 2*200 |
The hydraulic pressure(Mpa) | 30 |
Walking speed(Km/h) | 28 |
Climbing ability(%) | 40 |
Rotary speed (r/min) | 12.5 |
Arm digging force(KN) | 90 |
The bucket digging force(KN) | 120 |
Overall Length(mm) | 9555 |
Overall Width(mm) | 2760 |
Overall Height of Boom(mm) | 3450 |
Overall Height of Cab(mm) | 3260 |
Overall Height To Engine Cocer(mm) | 2685 |
Counterweight Ciearnce(mm) | 1435 |
Ground clearance(mm) | 320 |
Upperstructure width(mm) | 2685 |
Wheelbase (mm) | 2960 |
Rear-End Length/Swing Radius (mm) | |
Overall Width of Blade(mm) | 2400 |
Overall Height of Blade(mm) | 630 |
Front Overhang(mm) | 1345 |
Overall Width with Outrigger Extended(mm) | 3835 |
Rear Overhang (mm) | |
Stick length(mm) | 2400 |
Maximum Cutting Height(mm) | 9585 |
Maximum Dumping Height(mm) | 6775 |
Maximum Digging Depth(mm) | 5735 |
Maximum Reach(mm) | 9445 |
Wheel Excavator is a single device consisting of three construction equipments. Commonly known as "busy at both ends". During construction, the operator only needs to rotate the seat to change the working end. The main work of excavator loader is to excavate ditches to arrange pipelines and underground cables, lay foundation for buildings and establish drainage system.
Slag loader commonly used in tunnels is also called rock loader, which is now replaced by excavator loader (bucket loader). Require small size, durable, easy to operate, easy to walk, high production efficiency, continuous uninterrupted operation, but also safe and environmental protection. The running modes of slag loader (rock loader) are tyre type, track type and caterpillar type. According to the arm bucket type of the slag loader, it can be divided into four types: bucket type, crab claw type, vertical claw type and bucket type. The first three types are gradually replaced by the dug bucket type in construction practice. Intermittence can not be continuous, reciprocating is not flexible, working ability is low, the dust caused by insecurity is larger, the operation is inhumane, rock size requirements are small, slope is limited and other defects.
Tire-type slag loader is only suitable for 1.7m space, and can only work in roadways. Its disadvantage is that it is easy to slip and sink and scratch tires in tunnels of water and hard surrounding rocks. It has low benefit and less feeding force. Its advantage is that it is super-small space for slag loading and ore filling, and its price is the cheapest but it is more economical than manual work. Track slag scraper is suitable for supporting rail transportation, which is more economical, but its working scope is limited, and rail erection and laying is more troublesome and can not work on gradient. Its advantages are moderate price, higher efficiency, greater feeding intensity and more scraping. The crawler slag loader combines all the advantages and disadvantages mentioned above, but the earlier investment is more expensive, but the benefit is greatly doubled the cost of construction period to the lowest point at present.
OUR SERVICE
1)Professional fast response mechanical engineers and electrical engineers provide suitable solution method for you all around the world.
2)Engineers available to reach machinery overseas job site at any time required.
3) Technical Support of installation/training supplied to help customers to earn most profits with our machinery.
4) All variety of spare parts available to support the customer 24h*7days for the daily maintenance/repair purpose etc.
OUR PRICE
We work as the leading VIP dealers of various famous Chinese construction machinery manufacturers and are constantly treated with best price policy which is only provided to special internal high level permission.From numerous comparison and feedback from clients.Our price is always more competitive and much favorable than the customer buy directly from manufacturers.
OUR PRODUCTS
Established in 2010, Anhui heavy and light industries International Group, which is located in Hefei City, the provincial capital of Anhui Province, China, has business for construction machinery,international trade, finance investment and education.
As the leading construction machinery exporter in China. We has over 100 countries international business and the annual sales figure exceeds USD 100 million.
It is an important export partner of the world famous brands such as SINOTRUK,SHACMAN,North BEIBEN,DONGFENG,FOTON,,ZOOMLION,HELI,CAMC,SDLG,SEM,LONGKING,LIUGONG,HANGCHA,HYUNDAI,DOOSAN,YTO,CIMC,etc. And manages the export of spare parts for these products with a stable customers network and good reputation worldwide.
FAQ 1: What kind terms of payment can be accepted? A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted 2: What certificates are available in Machinery? A: For the certificate, we have CE, ISO, Gost, EPA(USA)CCC, 3: What about the delivery time? A: 7-20 days after receiving the deposit. 4: What about the warranty time? A: 12 months after shipment or 2000 working hours, whichever occuts first. 5. What about the Minimum Order Quantity? A: The MOQ is 1 pcs |