PULL-OFF STRENGTH (BOND STRENGTH)

STANDARD: ISO4624, ASTM D4541 AND ASTM D7234

This method is particularly suitable for applications concerning testing repairs of concrete structures where the bond strength between two layers is an important factor. The same principle is applied to test the adhesive strength of different types of surface coatings like cement plaster, lime, wall plaster, etc. on its support.

Features:
1. Serial communication port:
Communicate with the computer through RS-232 serial
communication port through which stored test data can be
transmitted to the computer.
Test results can be printed out by the provided software.
2. Sensor input port:
Through shielded wire of sensor and straight load sensor to
measure adhesion force.
3. Zero adjustment potentiometer:
allow to manually adjust the initial value of sensor to zero.
4. Calibration potentiometer: calibrate the sensor

Packing List
Actuator 1 piece
Display instrument 1piece
Dolly(dia.10mm, dia.14mm, dia. 20mm and dia.
50mm, each type has 5 individuals)
Cutting tool( dia. 10mm, dia.14mm, dia.20mm and
dia.50mm, each type has 1 individual)
Adhesive 3 pieces
Software CD 1 piece