Usages

please use this product on the sunny day at 10:00 AM-3:00 PM. Construction environment should be no dust, ventilated and dry. Step 1 to step 4 should be absence of direct sunlight. Suggest cyclic operation, spray every headlight at first, then do the same spray at the second cycle.

1. Polish: polish the surface of headlight by 2000# waterproof abrasive paper with spongy cushion wood. Polish deeper at severely damaged place. The lamp must be polished to no luster.

2.Cover: clean the lampshade with water, then dry and cover the lampshade around with masking film.

3.Oil removing wax: remove the wax, oil and stain with "oil and wax removing wipes" or "degreaser", to ensure that the film is adhesive and smooth.

4.Spray: please  shake the can gently more than 45 seconds to make the liquid mix evenly. Spray steadily at the distance of 15 to 20 cm. The first time thinly spray, wait for 3-5 min. Then the second time thickly spray, wait for 3-5 min. The third  time  thinly spray to adjust the thickness where spray too thin on the lampshade. Until the lampshade is gloss, average and neatly.

5.Dry: wait for 3-5 min after spraying, expose it in the sun for more than 20 min, then this product can rapidly solidify by absorbing UV rays.