Double Curved Surface Submersible Mixer for Sewage Tank
China Double Curved Surface Submersible Mixer for Sewage Tank, Find details about China Surface Submersible Mixer for Sewage Tank, Waste Water Treagment from Double Curved Surface Submersible Mixer for Sewage Tank
Basic Info.
Model NO.
FL
HS Code
8421299090
Model NO.
FL
HS Code
8421299090
Product Desciption
Double curved surface submersible mixer for sewage tank
Brief description:
The main characteristics of sewage tank double curved surface submersible mixer: 1. Mixing and aeration in one device, can also be a single mixing; 2. Reasonable design, low power consumption; 3. Can be applied to large, medium and small sewage treatment, less investment; 4. Good treatment effect, long service life; 5. Made of PE or FRP, steel materials, etc., strengthen the anti-corrosion performance of the equipment; 6. Simple structure, convenient management
Double curved surface submersible mixer for sewage tank
Scope of application:
Hyperboloid blender (vertical blender) is suitable for environmental protection, chemical industry, energy, light industry and other industries where liquid and liquid, liquid and solid, liquid and gas need to be stirred and mixed, especially for sewage treatment engineering and water purification engineering. The wastewater is first intercepted by the grid and then pumped to the regulating tank. Then, the wastewater is pumped to the hydrolysis acidification tank by the secondary lift pump to react with the anaerobic sludge to remove some organic matter. After that, the wastewater flows into Cass tank from the outlet weir of hydrolysis acidification tank. In CASS tank, the operation sequence of water inflow, aeration for 2 h, sedimentation for 1 h and water outflow for 50 min is followed, and then the water is discharged into the sodium hypochlorite disinfection tank by decanter, and discharged after disinfection and sterilization. The excess sludge from hydrolytic acidification tank and CASS tank enters the sludge storage tank, and then dehydrates by sludge dehydrator, so that the sludge can be easily transported.
Double curved surface submersible mixer for sewage tank
Installation process:
1. The preset plate on the bridge should be leveled. The preset module base should be strong enough. Anchor bolts and connectors shall be firm and reliable.
2. Place the host on the preset connection backplane.
3. The umbrella impeller is connected with the mixing shaft and put into the pool safely. Be careful not to bump into objects like pools and bridges. Then, the mixing shaft is connected with the main machine. Note: before the completion of the above operation process, always keep the lifting equipment in a normal state, and pay attention to personal safety and equipment safety.
4. After the mixer is installed, check the shaft and vertical level. The vertical deviation is less than 1 / 1000 mm.
5. Remove the motor tail cover, rotate the blade by hand, and check whether the mixer is flexible and normal. The swing deviation of the mixing shaft should be less than 3 / 1000 mm.
6. Observe the rotation direction of the mixing wheel after the power supply and point action. From top to bottom, turn the direction of rotation correctly: counter clockwise. Vice versa, arbitrarily change the position of 2 power lines.
7. The installation of electrical equipment must be carried out in accordance with the relevant regulations of the state. Precautions: to ensure the safety of personnel and equipment. The grounding must be firmly connected.
Brief description:
The main characteristics of sewage tank double curved surface submersible mixer: 1. Mixing and aeration in one device, can also be a single mixing; 2. Reasonable design, low power consumption; 3. Can be applied to large, medium and small sewage treatment, less investment; 4. Good treatment effect, long service life; 5. Made of PE or FRP, steel materials, etc., strengthen the anti-corrosion performance of the equipment; 6. Simple structure, convenient management
Double curved surface submersible mixer for sewage tank
Scope of application:
Hyperboloid blender (vertical blender) is suitable for environmental protection, chemical industry, energy, light industry and other industries where liquid and liquid, liquid and solid, liquid and gas need to be stirred and mixed, especially for sewage treatment engineering and water purification engineering. The wastewater is first intercepted by the grid and then pumped to the regulating tank. Then, the wastewater is pumped to the hydrolysis acidification tank by the secondary lift pump to react with the anaerobic sludge to remove some organic matter. After that, the wastewater flows into Cass tank from the outlet weir of hydrolysis acidification tank. In CASS tank, the operation sequence of water inflow, aeration for 2 h, sedimentation for 1 h and water outflow for 50 min is followed, and then the water is discharged into the sodium hypochlorite disinfection tank by decanter, and discharged after disinfection and sterilization. The excess sludge from hydrolytic acidification tank and CASS tank enters the sludge storage tank, and then dehydrates by sludge dehydrator, so that the sludge can be easily transported.
Double curved surface submersible mixer for sewage tank
Installation process:
1. The preset plate on the bridge should be leveled. The preset module base should be strong enough. Anchor bolts and connectors shall be firm and reliable.
2. Place the host on the preset connection backplane.
3. The umbrella impeller is connected with the mixing shaft and put into the pool safely. Be careful not to bump into objects like pools and bridges. Then, the mixing shaft is connected with the main machine. Note: before the completion of the above operation process, always keep the lifting equipment in a normal state, and pay attention to personal safety and equipment safety.
4. After the mixer is installed, check the shaft and vertical level. The vertical deviation is less than 1 / 1000 mm.
5. Remove the motor tail cover, rotate the blade by hand, and check whether the mixer is flexible and normal. The swing deviation of the mixing shaft should be less than 3 / 1000 mm.
6. Observe the rotation direction of the mixing wheel after the power supply and point action. From top to bottom, turn the direction of rotation correctly: counter clockwise. Vice versa, arbitrarily change the position of 2 power lines.
7. The installation of electrical equipment must be carried out in accordance with the relevant regulations of the state. Precautions: to ensure the safety of personnel and equipment. The grounding must be firmly connected.
You Might Also Like
FEP Teflon Insulated Awm 1332 Standard 758 Cable UL Wire
Second-Hand Japan FUJI Servo Motor Strong Practicality Tube ......
Best Quality Film Faced Plywood 21mm Shuttering Plywood Comb......
Qr Code Biometric Payment Terminal POS with Fingerprint Read......
W251 Rear Air Shock Absorber Without Ads for Benz Auto Parts
Pet Toys Resistant TPR Rubber Toy Clean Teeth Dog Bite Barbe......
3CH R/C Helicopter Syma RC Model Helicopter (S006) (RPC68873......
Analog Manometer-Air Pressure Gauge-Gas Manometer
Industrial Steam Turbine Generator 100kw to 3600kw
China Top Quality Nv-100 Ophthalmic Near Vision Chart
Ce FDA Certificate Mc 1390 CCD Laser Cutting Engraving Machi......