DESCRIPTION and APPLICATION
The W-9 line array system which is made of two 12''neodymium woofers, two high sensitivity 8'' midrange speaker units, two 3'' titanium neodymium compression drivers, the drivers by two independent plane wave converter, with a innovative directly horn which generate parallel wave in the front.
W-9 speaker box is trapezoid shaped, hi, mid, low driver units all with independent horn
Output, which improved the speaker sound, maximum lowed the intervention between the drivers.
The precise positioning position between the driver units which verified the speaker box very small, but also to ensure the gap between the cabinet to cabinet minimize. Even several boxes combination can also with a precise point forming a line array group, resulting in excellent sound quality, each box is installed with hanging assembly, can be convenient for hanging, assembling, which application W-9 line array performance excellent to large stadiums, big outdoor concerts, commercial events, etc.
Model
W-9
Type
Line array system
Frequency Response
52Hz-20KHz± 3dB
Power handling
LF 2× 600W(RMS)2× 1200W(PEAK)
MF 500W(RMS)1000W(PEAK)
HF 200W(RMS)400W(PEAK)
Sensitivity
LF 104dB(1W1M)
MF 108dB(1W1M)
HF 111dB(1W1M)
MaxS. P. L
LF 135dB(PEAK/1M)
MF 135dB(PEAK/1M)
HF 134dB(PEAK/1M)
LF section
2× 12" (310mm)neodymium woofer
75mm(3in) coil
Nominal impedance
8 ohm
MF section
2× 8" (210mm)neodymium MF
65mm(2.5in)coil
Nominal impedance
8 ohm
HF section
2× 3"neodymium compression driver
With 75mm titanium diaphragm
Nominal impedance
16 ohm
Output section
3-channel
Dispersion pattern
110° H× 7.5° V
Finish
Water-proof, wear-resistant textured black paint
Array design
Arrays of less than 3× W-9 will
Provide poor dispersion control and
Are neither recommended nor supported
Speaker cables
LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-)
Rigging system
Please refer to the W-9 user
Manual before any operation
Input connectors
2× Neutrik NL8
Recommend crossover
LF 60Hz-250Hz
MF 250Hz-1.8kHz
HF 1.8kHz-20KHz
Dimensions
932× 360× 530mm(W× H× D)
Package dimensions
1000× 430× 600mm/0.26cbm
Enclosure
Birch Plywood
Net weight
55kg
Gross weight
59kg
| Model | W-9 |
| Type | Line array system |
| Frequency Response | 52Hz-20KHz±3dB |
| Power handling | LF 2×600W(RMS)2×1200W(PEAK) |
| MF 500W(RMS)1000W(PEAK) |
| HF 200W(RMS)400W(PEAK) |
| Sensitivity | LF 104dB(1W1M) |
| MF 108dB(1W1M) |
| HF 111dB(1W1M) |
| MaxS.P.L | LF 135dB(PEAK/1M) |
| MF 135dB(PEAK/1M) |
| HF 134dB(PEAK/1M) |
| LF section | 2×12" (310mm)neodymium woofer |
| 75mm(3in) coil |
| Nominal impedance | 8 ohm |
| MF section | 2×8" (210mm)neodymium MF |
| 65mm(2.5in)coil |
| Nominal impedance | 8 ohm |
| HF section | 2×3"neodymium compression driver |
| with 75mm titanium diaphragm |
| Nominal impedance | 16 ohm |
| Output section | 3-channel |
| Dispersion pattern | 110°H×7.5°V |
| Finish | Water-proof,wear-resistant textured black paint |
| Array design | Arrays of less than 3×W-9 will |
| provide poor dispersion control and |
| are neither recommended nor supported |
| Speaker cables | LF 1(+)1(-) 2(+)2(-) MF 3(+)3(-) HF 4(+)4(-) |
| Rigging system | Please refer to the W-9 user |
| manual before any operation |
| Input connectors | 2×Neutrik NL8 |
| Recommend crossover | LF 60Hz-250Hz |
| MF 250Hz-1.8kHz |
| HF 1.8kHz-20KHz |
| Dimensions | 932×360×530mm(W×H×D) |
| Package dimensions | 1000×430×600mm/0.26cbm |
| Enclosure | Birch Plywood |
| Net weight | 55kg |
| Gross weight | 59kg |