Products

Apv Heat Exchanger Titanium Plate (M6, M10, M15, M20M , M30)

China Apv Heat Exchanger Titanium Plate (M6, M10, M15, M20M, M30), Find details about China Heat Exchanger Plate, Titanium Plate from Apv Heat Exchanger Titanium Plate (M6, M10, M15, M20M, M30)

Model NO.
(M6, M10, M15, M20M, M30)
Plate Hole
0 Hole, 1 Hole, 2 Holes, 3 Holes, 4 Holes
Gasket Type
Clip on, Lock in, Glued
Gasket Material
NBR, HNBR, EPDM, Fluorine Rubber
Apv Heat Exchanger Titanium Plate
M6, M10, M15 , M20m, M30 Plate
Trademark
Jiema or OEM
Transport Package
Polywood Box
Specification
ISO9001: 2008, SGS
Origin
Guangzhou, China
HS Code
8419909000
Model NO.
(M6, M10, M15, M20M, M30)
Plate Hole
0 Hole, 1 Hole, 2 Holes, 3 Holes, 4 Holes
Gasket Type
Clip on, Lock in, Glued
Gasket Material
NBR, HNBR, EPDM, Fluorine Rubber
Apv Heat Exchanger Titanium Plate
M6, M10, M15 , M20m, M30 Plate
Trademark
Jiema or OEM
Transport Package
Polywood Box
Specification
ISO9001: 2008, SGS
Origin
Guangzhou, China
HS Code
8419909000
    APV Heat Exchanger Titanium Plate (M6, M10, M15, M20M, M30)





Description
Introduction to Plate Sheet
             The sheet is of unique linear and planar positioning structure, which can reduce the possibility for inter-sheet malposition;
Fillets in the sheet are of "Interlocked" structure which allows for mutual interlocking of sheets.
The herringbone corrugated sheet is featured by high heat transfer efficiency; in addition, net-shaped contacts are formed in mutually reverse directions after the entire machine is assembled, featuring good pressure resistance.






Features :

  1,  high heat transfer efficiency
  2 ,  net-shaped contacts
  3, good pressure resistance



Plate  Material :   304# stainless steel , 316L# stainless steel , Titanium , Nickel , Alloy .


Plate Thickness :   0.24 in (0.6mm) , 031 in (0.8mm) and .039 in (1mm)

 
 Material Description Code Applicable Temperature (degree centigrade  ) Anti-corrosive Performance and Applicable Occasions
 NBR N -20~110 Hot air, water, non-polar oil, mineral oil, lubricant and silicone oil, etc.
 EPDM E -50~150 Vapor, polar chemical medium, alcohol, weak acid, weak alkali and oxidizing agent, etc.
CR C -40~100 Ammonia, mineral oil and lubricant, etc.
 Fluorine Rubber F 0~180 Inorganic acid, alkali, mineral oil and Haloalkane, etc.
 Silicon Rubber Q -65~230 Resistant to cold current and dry hot




 

You Might Also Like