Introduction
       This equipment adopt CNC control system ,through the interface set the control process size and speed technology ,high precision straight guide rail and ball screw drive structure and control system ensures machining dimension accuracy,could realize the thickness in (2~19)mm glass grind and chamfer . It is suitable for rough grinding and polishing of glass in household appliances, furniture, automobiles, screens, bathrooms, etc.
DATA SHEET
X-K2515 CNC Shape Edging Processing Center Specification 

Actual measurement data

✓  Max. Process size :2500*1500
✓  Min. Process size: 100*100(customed the sucker).
✓  process thickness :2-10MM rough grinding ,fine grinding.4-8MM polishing
✓  Finished product ratio:up to 97%(less than 6mm rough and fine grinding ,cutting conform inquiry ). 95% (polishing product , 3%      could repair )
✓  Speed:          120Mo. 8~12m/min
                          150Mo. 6~8m/min
                          220Mo. 3~6m/min
 ★★   2mm,3mm It can be directly processed by thin wheel. To achieve the effect of thick glass, it is necessary to use the No. 1 and No. 2 wheels.                The processing speed is greatly affected by the glass cutting precision, the amount of edging and the grinding wheel manufacturers.
✓  Minimum inner radius:R10   Minimum outer radius: R1 .
✓  Acceptance method: The buyer provides a product. After the commissioning is completed, 100 pieces are completed, and the yield is 97%. The         qualified product is qualified for cutting. The finished product error is ±0.2MM, no bright spots, no bright bars, no Focal edge).

notice
★★   Ambient temperature is 7 ° C ~ 45 ° C, relative humidity ≤ 60% under normal conditions
★★   Gas source requirements: ≥ 0.5Mpa, the gas source is required to be stable.
★★   Water source: workpiece cooling; no impurity groundwater or tap water
★★   Spindle cooling: pure water or tap water plus rust inhibitor
Other models

Other Products

Company Profile