2XZ vacuum pump for autoclave with a small size, light weight, low noise, easy to start and so on. In addition, there are measures to prevent oil return (2XZ-8) and measures to prevent contamination of the site with oil seals.
1. It can be a separate role, can also be used as various types of high-vacuum system of the pre-pump and pre-pump.
2. The inlet continuous open air operation, shall not exceed three minutes.
3. The pump does not apply to the extraction of metal corrosive, the chemical reaction of the oil from the pump, containing dust particles of gas to the body oxygen is too high, there is explosive gas.
4. The pump has to be used for compression pump or pump.
5. Working environment: temperature 5 ºC -40 ºC range, the relative temperature is not greater than 90%, inlet pressure less than 1333Pa under the conditions allow long-term continuous operation.
6. The installation of the power supply, according to the provisions of the motor tag wiring, motor rotation should be noted that the direction of the arrow on the bearing the same direction.
7. Continuous pumping container pipe, the diameter should not be less than the pump inlet diameter, and the pipe should be short and less elbow, while paying attention to pipeline leakage.
8. Before each start focusing on the oil level to stop the pump oil to the oil standard glass diameter of 4/5 height is appropriate.