Test Oil Kolor kut oil finding paste test:

It is a creamy substance. When measuring the oil level in the container, apply it to the dipstick to clearly show the position of the oil level on the dipstick. The test ointment is used to detect oily products with lighter or more transparent colors, which can effectively detect the oil content of gasoline, diesel, naphtha, kerosene, crude oil, aviation kerosene and hydrocarbons (hydrocarbons).

Application of test Oil Koror Kut oil finding paste
When determining the liquid level of the oil in the oil tank, it is necessary to measure the oil height and the water height by using a dipstick and a water gauge respectively. When measuring oil, especially when measuring light fuel oil, the light fuel oil volatilizes quickly and is prone to "crawling". The so-called "crawling" refers to the oil level in the container on the dipstick. The phenomenon in which the liquid mark is affected by the capillary action or the continuous movement of the liquid film produced when the dipstick is lifted from the container. Test paste should be used when it is suspected that the liquid level "crawl" affects the readings obtained and that the liquid level or "liquid mark" is always irregular in contour.




Kolor Kut Test water paste:
It is a creamy substance that reacts with water and does not react with oil. When measuring the water level at the bottom of the solution, apply it to the water gauge, and the color of the water immersion changes, so that the position of the water surface on the water gauge can be clearly displayed. The test water paste can be used with the dipstick and can quickly and accurately detect whether the oil contains water in the tank. It is also suitable for all petroleum products, diesel, kerosene, ethanol fuel, and various mixed fuels, sulfuric acid, nitric acid, hydrochloric acid, Ammonia, soap, salt and chloride water content measurements. Even under extreme temperature conditions, the color change of the paste shows a clear detection effect. Characteristic: the reaction rate is fast, the reaction time is clear, and the duration time is long.

Application of Kolor Kut test water paste:
Since the tank will collect the bottom water at the bottom of the tank during long-term storage, we need to know the exact amount of bottom water to deduct the bottom water volume from the total volume and calculate the exact amount of pure oil in the tank. When measuring the amount of bottom water, we usually use a water gauge to measure the water height. However, since the water is at the bottom of the tank, it is not easy to distinguish the water height and the oil height during the measurement. At this time, we have to apply a layer to the water gauge. Use a thin test strip or use a clip to hold one or more test strips vertically to measure the water level in the tank.




How to use the Koror Kut oil finding paste:
Apply a thin layer of test paste to the cleaned dipstick and place it in a clear glass jar filled with oil for a certain period of time to allow the test ointment to react chemically with the oil. Observe whether there is a change in the portion coated with the test Koror Kut oil find.

The correct use of the test water test paste:
Apply a thin layer of test water to the cleaned water gauge and place it in a clear glass jar filled with oil and water for a certain period of time to allow the test paste to react chemically with water. Lift the ruler and observe if there is any color change in the part coated with the test water paste.


Precautions for using the test Kolor Kut Water Finding and Oil Finding paste:
(1) Wipe the dipstick (water gauge) before applying the test ointment (test water paste).
(2) Test cream or test water paste can only be applied to a thin layer, not too much.
(3) The test ointment or test water paste needs to be maintained for a sufficient period of time.
(4) Pay attention to observe the color change.

To measure the tank water height of the test water paste should be in accordance with the following technical requirements:
1. to test the water paste on the test the water feet, the water quickly becomes red (the temperature is 20 ºC. Color after the color is clear, the line is clear, can be consistent with the water surface.
2. Test the water between the water stay 20s and stay 5S test the water paste caused by changes in the value of the display should not be more than 0.5mm, there is no loss of the phenomenon. Storage temperature: 2 ºC~45 ºC.

* Apply a thin layer of test oil to the surface of the cleaned dipstick copper scale or other measuring tools. Put the dipstick into the tank and the test cream will immediately turn from pink to bright red. A net content of 62 grams, a box of 12 bottles! (The above unit price is a single bottle price!)