Products

Aluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project Case

China Aluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project Case, Find details about China Die Casing, Die Casting from Aluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project Case

Pressure Chamber Structure
Horizontal
Tolerance Grade
5
Casting Surface Quality Level
1
Certification
CE, RoHS, ISO 9001:2000, ISO 9001:2008
Trademark
QD
Transport Package
Carton
Origin
China
HS Code
76169910
Pressure Chamber Structure
Horizontal
Tolerance Grade
5
Casting Surface Quality Level
1
Certification
CE, RoHS, ISO 9001:2000, ISO 9001:2008
Trademark
QD
Transport Package
Carton
Origin
China
HS Code
76169910
Aluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project CaseAluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project CaseAluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project CaseAluminium Alloy Die Casting Street Light Roadway Highway Lighting Holes New Style Civil Engineering Project Case
Remark:

Aluminum alloy die-casting products are all inner holes, so it is necessary to make a die mould, otherwise it is difficult to remove the edge of waste materials, which costs a lot of labor. Is there a good die-casting die?

here are also problems. The die casting task of our company is full, and environmental protection is not allowed. The environmental protection review is related to the number of machines.

We have to building a new factory and purchase new machines. Now it is very tiring to building a factory. Generally, the mold take lead time will say 35 days, but it usually takes 40 ~ 45 days to really form.

Unless the mold is simple, because after the mold is made in 35 days, there will be some small problems. If it is confirmed to be correct, the mold needs to be denitrified technoloy test and to strengthen the service life.

Our product has many closed holes, and waste edges will be generated in the production process. At this time, it is a waste of working time to manually remove the waste edges. Therefore, the punching mode will be used, so the punching die will be made.

How many molds can be pressed out is a matter of luck. Generally, the mold life will only ensure that 50000pcs products are cast. After 50000 pieces, it doesn't matter.

Sometimes if the mold is done well, 200000pcs products can be stamped, but at this time, the molds will be concave, prominent and uneven, especially the feed inlet. The blanking die should also be opened by a professional master. The price can only be known according to the size and complexity of the die.

After the mold is opened, it can be repaired, but it is always unsatisfactory. It is easy to be damaged again in high temperature, high pressure and high speed.
 

You Might Also Like