200m Hydrology Interface Probes & Water Level Meters Medidor De Nivel De Agua

China 200m Hydrology Interface Probes & Water Level Meters Medidor De Nivel De Agua, Find details about China 200m Medidor De Nivel De Agua, 200m Interface Probes & Water Level Meters from 200m Hydrology Interface Probes & Water Level Meters Medidor De Nivel De Agua

Basic Info.

Model NO.

WLM2

Probe Diameter

14mm

Probe Length

220mm

Trademark

Transport Package

Carton

Specification

0-30m,0-50m,0-100m,0-150m,0-200m,0-250m,0-300m

Origin

Shanghai, China

HS Code

9026100000

Model NO.

WLM2

Probe Diameter

14mm

Probe Length

220mm

Trademark

Transport Package

Carton

Specification

0-30m,0-50m,0-100m,0-150m,0-200m,0-250m,0-300m

Origin

Shanghai, China

HS Code

9026100000

Product Desciption

200m hydrology interface probes & water level meters medidor de nivel de agua

probe diameter	14mm
power	9v battery
ruler tape coating	PE/PU
Cable length	0-150m
probe length	220mm

General description

Water level meter provide an accurate measurement method of level meter, usually used for the measurement of water level in the drilling holes or water level pipe ,particularly suitable for hydropower engineering underground water level or artificially inspection dam observation.This instrument can be used in constructio period,but also can be used as the long-term safety monitoring project. comply with the dam safety monitoring technology standard(SL60-94)

Working principle
The measurement of the water level by the following two parts: 1. Underground material, it is composed by water level pipe and bottom cover (not include in the system,it is need purchased separately) Ground receiver-ruler water level meter, it is composed by detect head, ruler cable, receiver system and cable reel. Detect head: made by steel, inside is a water resistance contact point. When the contact point contact water, the receiver system will open, and when the contact point leave the water,the receiver system will close. Ruler cable: it made by ruler and cable, and use plastic technology keep them together, and avoid the steel corrosion and simple the operation,make the read more convenient and accurate. Receiver system:it is composed by sounder,indicate light. 2 the green button in the panel is test button, when push this button, light on and buzzing, that indicate the circuit is in good condition. Or else, the circuit have problem or the battery has no power.

Use method
In measuring, make the cable reel rotate and push the power button,put the detect head in the water pipe, put the ruler cable in hand and make it drop slowly. When the detect head contact point contact water, the receiver system buzzer will sound. Then you can read the data of the ruler cable and can know the water level.(if the surrounding voice is loudly, maybe you can hear buzzer,so you can observe the indicate light and voltage meter)

Maintenance
Because the system use battery to supply power, so when you finish test,you should keep it power off.Power supply is 9V,when it has no power,you should open the cover and change it. After measurement, please keep the detect head and cable clean, cable rolled in cable reel. And put them in a good condition. Unauthorized disassembly of the product, it can not put in water horizontally, the cable cannot bucking,especially the ends. The detect head should carry and put softly and avoid vibration.

Storage
Customer should open the box and check the product when you receive it.
Storage temperature-10~+40ºC,humidity less than80%,no aggressive gas.
Product warranty:1year.

special characteristics

1.Provide an accurate method of measuring water level.Usually used for measuring Wells, drilling and water pipe water.

2.Good physical and chemical properties, oil resistance, chemical corrosion resistance, abrasion resistance,
3.resistance to hydrolysis and microbial resistance;good low temperature performance, working temperature 40 ºC to + 90 ºC.