Products

3''-89mm SRC531 RC Drill Bits for Gold Mine Sampling Drilling

China 3′′-89mm SRC531 RC Drill Bits for Gold Mine Sampling Drilling, Find details about China RC Bits, RC Hammer from 3′′-89mm SRC531 RC Drill Bits for Gold Mine Sampling Drilling

Model NO.
SRC531
Trademark
sollroc
Origin
Made in China
HS Code
82071300
Model NO.
SRC531
Trademark
sollroc
Origin
Made in China
HS Code
82071300
Product Introduction:

Reverse Circulation, or RC Drilling, is a clean and environmentally friendly method of deep foundation installation. It employs dual-wall drill rods, comprised of an outer drill rod with an inner tube . As the sections of drill rod are screwed together, the inner tubes overlap and seal with O rings. This provides a continuous path for the drill tailings to be transported from the bit face to the surface.

The reverse circulation drilling method has the capability of reaching depths of 500 meters. A pneumatic hammer-like device is used to hammer into the earth to remove rock samples which are then pushed up into the mining machine using compressed air. The samples are collected in a sample bag which is located within the machine. More than one sample bag can be collected which allows for more of a variety of samples to be analyzed. Sample bags are usually marked to show the location from which the sample was taken as well as the depth from which the samples are extracted.



Product Advantages:

1.Although the process can be costly the overall drilling costs can actually be reduced by up to 40% when using reverse circulation drilling.

2.Results from reverse circulation drilling can be revealed much faster as the completion of the drilling process is done quickly.

3.The method is safe to use and requires fewer man hours.

4.Reverse circulation drilling requires less water than other mining methods.



Technical Parameters

SOLLROC RC BIT model SRC531:

Diameter

Buttons * button diameter

Button  angle

Flushing holes

Recommended
Shroud dia (mm)

 Approx.
Weight (kg)

mm

inch

Gauge

Centre


84
 		3 5/166*13mm4*12mm+2*12mm352823.8

86
 		3 3/86*13mm4*12mm+2*12mm352843.9

89
 		3 1/26*13mm4*12mm+2*12mm352874

92
 		3 5/86*14mm4*12mm+2*12mm352904.1

95
 		3 3/46*14mm4*12mm+2*12mm352934.2

100
 		3 15/166*14mm4*12mm+2*12mm352984.3

105
 		4 1/86*14mm4*12mm+2*12mm3521034.5




About us:

SOLLROC Reverse Circulation drilling (RC) ,from size 3'' to 5.5'', is a technique of drilling that uses dual wall drill rods that consist of an outer drill rod with an inner tube. By using compressed air to extract rock fragments sample,the samples travel through rods to a sample splitter at surface, avoiding all contact between the samples and the borehole wall that allows samples to be retrieved with minimal contamination,which is mainly used in deep hole exploration and mining grade control.

At sollroc, customer satisfaction is our top priority. Our sales team takes a proactive approach in meeting customers' needs. We take the time to get to know you and learn about your operations so we can better assist you. We strive to meet customers' needs by supplying the tools and equipment you need when you need them, providing product support, and following through with excellent customer service every step of the way.
 

 

Delivery Way:

By Air, By express or By Sea

 

Package :

Ply-wooden cases + pallet



Detail Photos:

3′′-89mm SRC531 RC Drill Bits for Gold Mine Sampling Drilling

3′′-89mm SRC531 RC Drill Bits for Gold Mine Sampling Drilling


 

You Might Also Like