1/4"npt brass air valve electric solenoid
You are buying 1 new Air Valve that has 1/4"npt ends
2 position, High Quality Brass Valve
150 Max psi
2.5mm Orifice
Pre-wired, 12 volt

Standard or Nonstandard:Standard
Structure:Control
Pressure:High Pressure
Power:Solenoid
Material:Alloy
Temperature of Media:High Temperature
Media:Air
Port Size:1/4" 3/8" 1/2"
Place of Origin:China (Mainland)
Model Number:VVU-3L-4F
Brand Name:VPC
Application:Air Suspension, Air Suspension

The New Design Air Suspension Solenoid Valve (Accuair Solenoid Valve Manifolds)  is engineered to provide the cleanest installation and most reliable operation on the market. This electronic solenoid valve unit inflates and deflates up to (4) individual Air Springs and has built-in push-to-connect 3/8" D.O.T. approved air fittings for all of its plumbing connections. It's more smart than our previous manifolds Assembly Valve Block wiring harness 160-4F Solenoid Valve.

Good replacement to Accuair AA-VU4  Air suspension valve block With E-level
Compatiable Suspension Type    4-Corner Full Air Suspension
Voltage Requirements      10.5-16 Volts
Current Requirements     1.1 Amps (for each of the (8) Valves)
Connectors     IP67 certified (immersion up to 3 ft)
Fitting Size     3/8" D.O.T. / P.T.C (x 8), 1/4" NPT (x 4)
No. of Inlet Ports     2
No. of Exhaust Ports    2
Max Operating Pressure     200Psi
Cv Flow Factor     0.33
Average Adjustment Time     2.2 Seconds (from 10% to 50% of travel)

8 Valve Air Suspension Block Complete.

1/2″ ports, 8 Valves 1 for up - 1 for dump x 4, gauge port,  - easy to install.
3/8" Brass Air Valves 3-Position 200psi 10mm (3/8") Orifice 40watt coil 200psi 8-Cyl Air-Engine Manifold Valve -Bare

Assembly Valve Block
1. Material: Brass or aluminum alloy
2. With wiring harness
3. Provide custom-built product or service
Assembly Valve Block is combination of 2 way 2 position valves, which is extensively applied in many production trades as automobile, boats and ships etc. The products are sold to distant countries and areas as America, Europe, Southeast Asia etc.
new 4 Valve Air Suspension Valve Block.
5W continuous duty coils with a total amp draw of less than 1.7 amps for all 4.
12 volt
3mm oriface direct acting style
150 psi rated with 40% pressure differentia
Two 3/8"npt Direct Action Air Valve Manifold
DIRECT ACTION MEANS THERE IS NO DIAPHRAGM OR O-RINGS TO WEAR OUT
4-Position
30psi Minimum Working Pressure
350psi Maximum Pressure
3/8"npt Inlet and Outlet
9.5mm Internal Orifice
1/4"npt Gauge Port
CV Rating 4.0
12-Volt