Products

GPS Module with Mediatek Mt3337 Chip Set Gnss Module

China GPS Module with Mediatek Mt3337 Chip Set Gnss Module, Find details about China Smart GPS Module, GPS Module from GPS Module with Mediatek Mt3337 Chip Set Gnss Module

Model NO.
DM1513-R
Chip Set
Mediatek Mt3337
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
PPS
1PPS
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 15.2x13.0x6.4mm
Origin
China
Model NO.
DM1513-R
Chip Set
Mediatek Mt3337
Package
Plastic Tray , Paper Cartoon
Communication Type
Uart/Ttl
PPS
1PPS
Trademark
DeliNComm
Transport Package
Plastic Tray, Paper Cartoon
Specification
Module Size: 15.2x13.0x6.4mm
Origin
China
General Description

        The DeliNComm DM1513-R is a complete GPS engine module that features super sensitivity, ultra low power and small form factor. The GPS signal is applied to the antenna input of module, and a complete serial
 data message with position ,velocity and time information is presented at the serial interface with NMEA protocol or custom protocol.
        Its -165dBm tracking sensitivity extends positioning coverage into place like urban canyons and dense 
foliage environment where the GPS was not possible before. The small form factor and low power consumption make the module easy to integrate into portable device like PNDs, mobile phones, cameras and vehicle navigation systems.

Applications
  1. LBS (Location Based Service)
  2. PND (Portable Navigation Device)
  3. Vehicle navigation system
  4. Mobile phone
Features
  1. Build on high performance, low-power MediaTek MT3337 chip set
  2. Ultra high Track sensitivity: -165dBm
  3. Extremely fast TTFF at low signal level
  4. Built in high gain LNA
  5. Low power consumption: Max 20mA@3.3V
  6. NMEA-0183 compliant protocol or custom protocol
  7. Operating voltage: 2.8V to 4.3V
  8. Operating temperature range:-40 to 85ºC
  9. Patch Antenna Size: 12x12x4mm
  10. Module Size: 15.2x13x6.4mm
  11. Communication type: UART/TTL
  12. RoHS compliant (Lead-free)
GPS Module with Mediatek Mt3337 Chip Set Gnss Module
GPS Module with Mediatek Mt3337 Chip Set Gnss Module


  1.2.Power Supply

        Regulated power for the DM1513-R is required. The VCC Pin Need a stable DC voltage supply. Power supply ripple must be less than 30mV. The input voltage Vcc should be 2.8V~4.3V, Recommended power supply voltage is 3.3V . maximum current is 20mA. Suitable decoupling must be provided by external decoupling circuitry.

   1.3.UART Ports

        The module supports two full duplex serial channels UART. All serial connections are at 3V CMOS logic levels, if need different voltage levels, use appropriate level shifters. The baud rate of both serial ports are fully programmable, the data format is however fixed: X, N, 8, 1, i.e. X baud rate, no parity, eight data bits and one stop bit, no other data formats are supported, LSB is sent first. The modules default baud rate is set up 9600bps, however, the user can change the default baud rate to any value from 4800 bps to 11500kbps. UART port can be used for firmware upgrade, NMEA output and PMTK proprietary commands input.

 
 2.Application
 
       The module is equipped with a 7-pin pad that connects to your application platform. The DM1513-R module It consists of a MediaTek MT3337 single chip GPS IC which includes the RF part and Baseband part, a patch antenna, a LNA, a SAW filter, a TCXO, a crystal oscillator.

2.1. Pin Assignment                                              
   
                                                                       GPS Module with Mediatek Mt3337 Chip Set Gnss Module

                     
     



2.2Mechanical Dimensions

     
 GPS Module with Mediatek Mt3337 Chip Set Gnss Module
  
GPS Module with Mediatek Mt3337 Chip Set Gnss Module


 




 

You Might Also Like