Products

Genuine Ospc Orbitrol Steering Unit 101s for Tractor

China Genuine Ospc Orbitrol Steering Unit 101s for Tractor, Find details about China Hydraulic Pump, Hydraulic from Genuine Ospc Orbitrol Steering Unit 101s for Tractor

Model NO.
101S
Displacement
200cc
Trademark
HANJIU
Transport Package
Carton
Origin
China
Model NO.
101S
Displacement
200cc
Trademark
HANJIU
Transport Package
Carton
Origin
China
Genuine OSPC Orbitrol Steering Unit 101S For Tractor

Hydraulic Steering Unit 10 series is integral hydraulic steering unit, the valve body of rotary valve is integral structure, then the steering unit can integrate with cartridge valve, such as the pressure control valve of the integral system.
Hydraulic Steering Unit 10 series is widely used in the steering control system of different kinds of engineering vehicles, such as the steering system of many kinds of industrial and agricultural mobile machinery forklift, loader, road roller, tractor, combine harvester, and the ship helm etc. The steering unit can control the steering cylinder with bigger resistance force by inputting minor force; It's easier , flexible and reliable; The integral check valve can prevent the system pressure oil from anti-vibration , and prevent from "hit-hand" during the steering operation; Integral pressure control valve can control the operation pressure and the shock pressure of the steering system.Genuine Ospc Orbitrol Steering Unit 101s for TractorGenuine Ospc Orbitrol Steering Unit 101s for TractorGenuine Ospc Orbitrol Steering Unit 101s for TractorGenuine Ospc Orbitrol Steering Unit 101s for Tractor



Product detail:

 

101s ON/OR for hydraulic systems where oil is supplied by a fixed-displacement pump. The range is wide and flexible, characterised by: • Low steering torque, 0.5 Nm to 1.8 Nm in normal steering situations • Low noise level and wide control range • One or several built-in valve functions: pressure relief, shock, suction, and/or nonreturn in pump connection • Port threads as required, to DIN, ISO, SAE or JIS standards.

101s is available in versions "Open Center Reaction" or "Open Center Non Reaction" (OR or ON) and with displacements from 40 to 500 cm3 /rev. 101s is also available in a "Closed Center Non Reaction" (CN) type. CN steering units are for constant-pressure systems with variable pump flow. In neutral position, the CN unit shuts off oil flow between pump and tank. CN units are available with displacements from 50 to 400 cm3 /rev.




 

Specifications:

 

 

ParametersSeries
101S-*-***-**-*
Function code1,2,41,4
Displacement (mL/r)506380100125160200250280315400
Rated Flow (L/min)5681012.5162025283240
Max.input pressure(Mpa)17.5
Relief Valve Pressure Settings ( MPa)06,07,08,10,12,14,15,16,17.5
Shock Valve Pressure Settings ( MPa)12,13,14,16,18,20,21,22,23.5
Max.cont.back pressure2.5
Weight(kg)5.755.815.895.966.16.36.56.736.917.17.5
Dimension L (mm)130132134137140145150156161166176
 

 





 

Product application:

 

01S Hydraulic steering unit is widely used in the steering control system, such as the steering system of many kinds of industrial and agricultural, mobile machinery forklift,loader,roadroller,tractor,comebine harvester, etc.

 






 

Common causes of failure and troubleshooting:

 

ProbleMCausesTroubleshooting
Oil leakage on the joint surface between the steering unit rear cover, stator and valve bodyrear cover stator bolt looseness (or uneven force), or O-rings damagedEvenly tighten the bolt, replace the seal
Oil leakage at steering shaftExcessive wear or damage of the seal ring at the shaft of steering unitReplace new seal
feels light when turn the steering wheel slowly, feels heavy when turn the steering wheel quicklyInsufficient oil supply from the oil pump to the steering unitCheck whether the oil pump is working properly (including liquid level, oil pump efficiency, pipeline smoothness, etc.)
There is foam in the oil, irregular sound, the steering wheel turns and the cylinder does not moveThere is air in the steering system

Eliminating the air in the system,

Check the suction pipe leaks or not, Or if the return nozzle is below the liquid level

Heavy steering continues to occurThe oil in the tank is below the specified positionAdd oil to prescribed height
Oil viscosity is too highUse oil as required
Fast and slow steering wheels are both heavy, and there is no pressure on steeringCheck valve of the P and T fails

Check the ball.

If the steel ball is missing, then insert the steel ball;

If the ball gets stuck dirty, it should be cleaned;

In both cases, it is necessary to check the effectiveness of the sealing tape recovery.

No load or light load turns light, increase load turns to heavyRelief valve is of system's pressure lower than required valueAdjust the pressure of the relief valve to the specified value (but not more than 16 MPa)
Relief valve stucked by dirt, Or spring failure,Or seal is damagedClean the relief valve (check the effectiveness of the sealing tape), or replace the spring or sealing ring
Steering wheel cannot be automatically centeredSpring broken or deformationReplace with new spring
Steering wheel rotates or swings left and right automaticallyRotor and the linkage shaft are in the wrong position

Stop immediately!

Align the rotor and linkage shaft

Can not reach an end positionLow pressure on relief valveProperly increase the pressure of the safety valve (it is best to adjust with a pressure gauge)

After turning to the end, the steering wheel can still be easily turned

Low pressure on shock valvesProperly increase shock valves pressure (it is best to adjust with a pressure gauge)
when machine is off, turn the wheel, cylinder not moveradial clearance or axial clearance is too large between radial and statorReplace rotor and stator
Low viscosity of oilChange oil
Slow cylinder actionshock valves failure (ball caught by dirty, or spring failure, or seal damage)Clean shock valves, replace spring or seal
Pressure of Steering system not able to be adjustedSpring brokenReplace the spring
Safety valve sealing quality is not highReplacement parts
Spool blockedTake out, check, and refurbish
Poor spool actionCheck whether the spool is blocked
Spring bent or too softReplace the spring
Oil is not clean and the spool hole is blockedReplace clean oil and clear spool holes


Genuine Ospc Orbitrol Steering Unit 101s for Tractor

You Might Also Like