Products

Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine

China Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine, Find details about China Rubber Mixer, Rubber Mixing Mill with Stock Blender from Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine

Model NO.
xk-160-xk560
Layout Type
Horizontal
Mixing Drum Shape
Circular Groove
Additional Capabilities
Milling
Operating type
Cycle Operating
Condition
New
Certificate
Ce
Identification
ISO9001: 2008
Trademark
GUANGYUE
Transport Package
Wooden Case or According to Your Needs
Specification
Rubber & Plastic Product
Origin
China(Mainland)
HS Code
847780000
Model NO.
xk-160-xk560
Layout Type
Horizontal
Mixing Drum Shape
Circular Groove
Additional Capabilities
Milling
Operating type
Cycle Operating
Condition
New
Certificate
Ce
Identification
ISO9001: 2008
Trademark
GUANGYUE
Transport Package
Wooden Case or According to Your Needs
Specification
Rubber & Plastic Product
Origin
China(Mainland)
HS Code
847780000
                                         XK-160   XK-400 XK-450 XK-560 Two Roll  Rubber Mixing Mill

1.Nylon bush & ball bearing bush 
2.Hardened and plant gear box 
3.CE,SGS,ISO

Rubber mxing mill is mainly used for warming, mixing and plastication of sizing.

ISO certificate

Direct manufacture since 1986

Good hard tooth surface reducer in use

Roller bearings in use

Low noise, long lifetime, save power up to 25%

Specifications

Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
1. The roller is made of chilled cast iron. It is divided into hollowed roll and drilled roll. The inner of hollowed roll is machined. The hollowed roll surface can be smooth or grooved. The grooved roll has full grooved surface, partial grooved surface and so on.

2. The roll is supported by roller bearing so it has low noise and long service life.

3. The roll bearing adopts grease lubricating and oil lubricating.

4. The pressure transducer system is available for directly displaying the working pressure and control the feed. When over pressure, it will automatically stops and save or print the pressure value.

5. The product is complied with nation-established safety standard (this standard is identical with Europe standard. )

Working Principle:
Two rollers rotate reversely with different speed, so the colloidal particles are drawn into the gap of the two rollers by the Friction.

Use for:
This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing(plasticating), Raw Rubber and Compound mixing, rubber warm-up mixing and pressing sheet.
Structure:
This machine consists of Base, Rack, Gland, Rollers, Bearing, Transmission device, Lubrication device, Decelerator, Adjustment device of the roller temperature, Emergency shutdown device and brake rigging and etc.

Features:
1'Two rollers are made from Chilled Cast Iron, smooth surface is highly polished and scratch proof by cutting knife: High hardness(68-75HSD) and wear-resistant;
2'The roller is hollow structure, which is for adjusting the temperature of the rollers by steam or cooling water in term of different request, Circulation of steam and cooling water is provided through the rolls to control the temperature;
3'There are two kinds of Nip adjustment mode for option: Manual or electric;
4'There are three kinds of Main bearings for option: Bearing or Copper bush or Nylon bush;
5'Machine will be tripped off if overloaded to protect valuable electrical circuit;
6'All electrical connections are well, short circuits is impossible by any means.
7'It can be with Stock Blender, or can provide provision to fit stock blender in future.
8'Provision for opening of Nip Guard is provided for the purpose of cleaning of rollers and nip;
9'Hand Operated Safety Switch is provided.

 

Type
Xk-160
Xk-250
Xk-300
Xk-400
Xk-450
Xk-560
Xk-660

Working diameter of rolls(mm)
160
250
300
400
450
560
660

Working length of rolls(mm)
320
620
750
1000
1200
1530
2130

Front roll surface speed(m/min)
8.95
14.1
15.1
18.65
24.26
27.72
28.6

Friction ratio
1:1.35
1:1.17
1:1.27
1:1.27
1:1.27
1:1.2
1:1.24

Max.nip(mm)
4.5
8
8
10
15
15
15

Capacity per.batch(kg)
1-2
8-15
15-20
18-35
25-50
35-50
165

Motor power
(kw)
5.5
18.5
22
37
55
90
245

Overall dimension(mm
1380*860
*1320
3400*1500
*1800
3580*1550
*1695
4350*1850
*1785
5200*2380
*1840
5845*2284
*1978
7465*3662
*2080

Any question ,please send me a inqury ,looking forward to your kindly inquiry!Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine
Open Rubber Mixing Mill Two Roll Mill Rubber Mixing Machine

You Might Also Like