1.Operation instructions
 (1)Check whether the power voltage conforms to that on the designation plate and the power should connect to the reliable ground wire.

 (2)Raise ice crushing handle to the upper stop,connect to the power,turn on the master switch and place the ice basin on the underframe with the ice cubes put into the ice crushing barrel.(Note:Quantity of the ice cubes should not exceed the ice crushing barrel level).Then press down the ice pressing handle to make the protective switch automatically turned on and crush the ice.After finishing,please raise the ice crushing handle to the upper stop again and repeat the above the mentioned operation process.


2.Keep clean
 After using the ice crusher,the switch should be turned off.Disconnect the power plug and wipe .dry the body,then place the machine in the dry place. 


3.Cautions     
 When using,the outlet of ice cubes cannot be jammed or the cutter head may get stuck and the motor may be burnt our.If the abovementioned conditions appear please find ont the reasons immediately,cut off the power and raise the handle.

4. Note
In order to continuously improve our products,our company has a right to modify the above mentioned technical parameters without giving notifying.