Hot-Sell and Factory Direct Sale HD-Sdi Doom Camera Surge Protector

China Hot-Sell and Factory Direct Sale HD-Sdi Doom Camera Surge Protector, Find details about China Surge Protector, HD-Sdi Camera Signal SPD from Hot-Sell and Factory Direct Sale HD-Sdi Doom Camera Surge Protector

Model NO.
OP-SV3-SDI
Weight Per Unit
200g
Housing Material
Aluminum
Index of Protection
IP20
Operating Environment
Temperature:-40-+85oc Humidity: ≤95%
Warranty
Warranty
Response Time Ta
≤1ns
Technology
Pan / Tilt / Zoom
Style
Dome Camera
Sensor
CCD
HDMI Format
1080P
Horizontal Resolution
480tvl
Kind
Autofocus Lens
Feature
Vandal-proof, Mini Size, High Definition, Waterproof / Weatherproof
Effective Distance
10-30m
Sensor Size
1/4 inch
Remote Control
With Remote Control
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
Model NO.
OP-SV3-SDI
Weight Per Unit
200g
Housing Material
Aluminum
Index of Protection
IP20
Operating Environment
Temperature:-40-+85oc Humidity: ≤95%
Warranty
Warranty
Response Time Ta
≤1ns
Technology
Pan / Tilt / Zoom
Style
Dome Camera
Sensor
CCD
HDMI Format
1080P
Horizontal Resolution
480tvl
Kind
Autofocus Lens
Feature
Vandal-proof, Mini Size, High Definition, Waterproof / Weatherproof
Effective Distance
10-30m
Sensor Size
1/4 inch
Remote Control
With Remote Control
Trademark
opplei
Transport Package
Carton or Wooden Cases
Specification
CE, FCC, ISO9001, RoHS, China National Type Test
Origin
China
HS Code
8535400000
video power control 3 in 1 HD-SDI Dome Camera Surge Protector

Model: OP-SV3/SDI/220
 
APPLICATIONS:
Designed to protect monitor equipments (Power, Date Control, Video), widely applied in bank monitor & safe
guard system.
Monitor equipment for school, enterprise, road etc. security and protection.
FEATURES:
Multi. Protection circuits, Gas-Tube+ TVS technology
Dual protection in Common module and different module
3 in 1 protection
TVS array technology, low capacitance
Multi-Strike Capability
TECHNICAL PARAMETER: 
ModelOP-SV3/SDI/220
Electrical Parameter
Video & Control Part
Max. continuous operating voltage Uc12V
Nominal discharge current(8/20µs)In3kA
Max. discharge current  (8/20µs)Imax10kA
Limiting voltage (10/700µs) Up 
Line-line40V
Line-ground500V
Adapt transmission rate1.485Gbps
Insertion loss0.5dB
Response time tA1ns
Impedance75
Interface formBNC, 2P Compression plug
Power Part 
Working voltage275V AC
Max. continuous operating voltage220V AC
Nominal discharge current (8/20µs)5kA
Max. discharge current (8/20µs)10kA
Protection level (8/20µs)1000V
Interface form2P Compression plug
Mechanical characteristics 
Dimension100(L) ×70(W) ×44(H)mm
Weight per unit200g
IP CodeIP20
Working conditionsTemperature: -40 to 80ºC,
Relative humidity: ≤95%
Standards complianceCE, FCC, RoHS


INSTALLATION AND MAINTENANCE

a)    The SPD should be connected in series between the protected device and the signal/power transmission channel.
b)    The input terminal (IN) of the SPD should connect to the signal transmission channel, and the output terminal (OUT) of the SPD should connect to the protected device.
c)    Connect grounding wire of the SPD to grounding bus-bar of the lightning protection system of the room or building.
d)No special duty needs to be carried out for maintenance. When problem arises and the SPD is suspected, check the system with SPD taken out of circuit. Should system recover, the SPD shall be regarded as a damaged unit and must be replaced immediately