China Sunhans 2.4GHz RF Network Amplifier 20W Wireless High Power Repeater Bluetooth Audio WiFi Signal Booster Indoor, Find details about China Cell Booster Network Repeaters, Cellular Range Extender from Sunhans 2.4GHz RF Network Amplifier 20W Wireless High Power Repeater Bluetooth Audio WiFi Signal Booster Indoor
Cell phone Amplifier Description: 20W 2.4Ghz 43dBm WiFi Signal Booster Indoor
SKU | 0305SH100282 |
Model | SH24Go20W |
Operating Range | 2400~2500MHz |
Channel width | 20Mhz & 40Mhz |
Supported standards | IEEE 802.11b/g/n |
Operating Mode | Bi-directional, half-duplex, time division duplex |
Connector type | To radio SMA female (hole inside). To antenna RP-SMA female (pin inside) |
Input power | 0~26dBm (Note: If the input power is greater than 20DBM, it needs to be explained in advance with the supplier, so that the manufacturer can adjust the equipment.) |
Transmit gain | 25dB |
Output Power | 20W (43dBm) |
Receiver Gain | ≤ 22 dB |
Noise Figure | ≤3.5 dB typical |
Frequency Response | ±1dB over operating range |
Connector type | N-K female |
Power supply | 24V/2A DC, 100~240V |
Operating Temperature | -25°C to + 55°C |
Operating Humidity | Up to 75% relative humidity |
Material | Cast Aluminum |
LED light | Power status / activity status LED |
Booster Size | 15.2 x 13.1 x 2.6cm |
Booster Weight | 870g |
Package contents:
1 x SH24Gi20W WiFi booster
1 x power supply
1 x user manual
All specifications of PA can be customized based on customer requirement.
Application:
2.4GHz 20w 43dBm is outdoor wifi signal booster/amplifier/repeater is used for Bluetooth system; Robotics for beach and flood rescue;
For house, office,Hotels,supermarkets, Hospitals,parking spaces, office....
Solution: Hot Spot solutions,Access points,Smart home systems
Product Description:
1.20W 2.4GHz 43dBm is the fast and easy way to extend your signal range in any environment. This wireless signal repeater is ideal for use with 2.4GHz frequency hopping or direct sequence spread spectrum radio modems and 1500 MBps IEEE802.11b/a/g/n devices.
2.Increase range by providing transmit gain as well as lownoise receive gain. This receive gain increase the receive sensitivity of wireless LAN.
3. Access point.Full output power of 20W is achieved with only 36 mW input into the WiFi signal booster.
About us
Our Service: