China Gold Silver Jewelry Rings Necklace Bangles Marking Cutting Machine Fiber Laser Jewelry Laser Engraving Machine, Find details about China Engraving Machine, Necklace Cutting from Gold Silver Jewelry Rings Necklace Bangles Marking Cutting Machine Fiber Laser Jewelry Laser Engraving Machine
Technical Indicators | Name | |
Laser Parameters | laser source | Raycus/JPT/IPG(optional) |
Laser Wavelength | 1064nm | |
Average Output Power | 30w | |
Modulation Frequency Range | 30kHz-60Khz(20w/30w); 50khz-100khz(50w) | |
Galvometer Parameters | Maximum Linear Speed | 7000mm/s |
Resolution | 12μrad | |
Repeatability | 8μrad | |
Optiocal output characteristics | Marking Range | 110x110mm |
Minimum Line Width | 0.01mm | |
Minimum Character height | 0.2mm | |
Cooling System | Cooling Method | Air Cooling |
Systen Property | Laser power | 0.5kw/AC220V(110V optional) |
LTower height | 50cm/80cm | |
Environment Requirement | 0-35ºC |
brass marking | https://youtu.be/bieldrdDPP0 |
Jewelry ring marking | https://youtu.be/ZSgs1BphpUk |
Jewelry ring cutting | https://youtu.be/V2WM4DrAG_Y |
stainless steel marking | https://youtu.be/oX7pJrggGgs |
Carbon steel marking | https://youtu.be/1L_mpHLIOg4 |
Fiber laser marker can mark on almost any metal.
It can also cut some thin jewelry plate.
30w cut up to 0.5mm gold/silver/brass.
50w cut up to 1-1.2mm gold/silver/brass.
If thicker than this thickness,it is also ok,but it takes much longer time to do it.
Ply-wood case:99*62*106cm,120kg/154kg