Products

Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products

China Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products, Find details about China UV Laser Marking Machine, Laser Marking Machine from Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products

Model NO.
RF-UV
Type
UV Laser Marking Machine
Marking Method
Scanning Marking
Portable Name
Portable Split UV Laser Marking Machine
Cooling Way
Air Cooling
Laser Source Brand
Inngyu
Laser Power
3W 5W 10W
Application
Laser Marking
Control Software
Ezcad(Bjjcz)
Warranty
2 Years
Place of Origin
Shandong China
Working Accuracy
0.01mm
Wavelength
355nm
Support Format Supporte
Ai, Plt, Dxf, BMP, Dst, Dwg, Las, Dxp
Trademark
Ray Fine
Transport Package
Wooden Box Fixed Protection Packaging
Specification
75*47*80cm
Origin
Shandong China
HS Code
845611
Model NO.
RF-UV
Type
UV Laser Marking Machine
Marking Method
Scanning Marking
Portable Name
Portable Split UV Laser Marking Machine
Cooling Way
Air Cooling
Laser Source Brand
Inngyu
Laser Power
3W 5W 10W
Application
Laser Marking
Control Software
Ezcad(Bjjcz)
Warranty
2 Years
Place of Origin
Shandong China
Working Accuracy
0.01mm
Wavelength
355nm
Support Format Supporte
Ai, Plt, Dxf, BMP, Dst, Dwg, Las, Dxp
Trademark
Ray Fine
Transport Package
Wooden Box Fixed Protection Packaging
Specification
75*47*80cm
Origin
Shandong China
HS Code
845611
Portable Split 3W 5W 10W UV laser marking machine
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
Machine advantages
(1)Air cooling laser is adopted, this not only condenses the size of the device, but also reduces the power consumption of the device.
(2)The machine is air-cooled to cool down. It does not need an industrial water chiller to work independently. This will be very convenient. Sometimes you will feel that the machine and industrial water chiller working together will be very troublesome.
 
Machine application
(1).Applied Materials:Metal materials, plastic products, silica gel products, glass products, jade, jadeite, ceramics, acrylic products
(2).Application industry:ITO Film Etching, Ceramic Cutting, Scribing and Marking, Glass Cutting and Marking, Polymeric Material Marking and Cutting,Material Microprocessing, Wafer Cutting, Laser Rapid Prototyping, Scientific Research.
 
Marking sample
 
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c ProductsFiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c ProductsFiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
 
The main part of the machine
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
Inngu air cooling UV laser source
 
(1)Famous brand of UV laser in Jiangsu, China,New air-cooled design.
(2) the warranty period of the machine is 2 years.
(3)During the warranty period, if there is any quality problem with the machine's accessories, we can give you a free replacement of the accessories, and we will pay the freight.
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
Professional UV Laser Scan Head
 
(1)It has the advantages of fast marking speed and high marking accuracy.
(2)It has a double red light, which can help you find the marking focal length more conveniently.
(3)It comes with an alert that will alert you in time when the machine fails
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
F-theta-lens
 
(1)Wavelength high quality F-theta-lens;
Imported from materials, no light leakage.
(2)The quality of the provided beam can greatly improve your marking effect
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
Genuine BJJCZ control board
 
Genuine EZCAD control software and BJJCZ card which support XP /WIN7 /WIN8 /WIN10 , 32/64 bit operating system. High quality make machine works stably.
 
Machine parameters
Model  UV 3W UV 5W UV 10W
Wavelength(nm)355nm355nm355nm
Pulse Repetition Rate Range10kHz to 150kHz(Options:single shot to 200kHz)
Pulse Width (ns) @30kHZ≤16≤18
Average Power@30kHz>3W>5W>10W
Average Power Stability<±3% over 24 hours
Spatial ModeTEM00(M² <1.2)TEM00(M² <1.3)
Beam Divergence Full Angle< 2 mrad
1/e2 Beam Diameter0.7mm
Beam Roundness>90%
Pointing stability<50urad
Marking depth≤0.5mm
Power supplyAC220V/110V 50HZ/60HZ
 
Machine packing
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
1.Clean the machine surface and make sure that the machine surface is clean.
2.Check that there is no problem with the machine, and then wrap the machine with plastic wrap to prevent the machine from scratching.
3.Then it is packed in wooden cases, surrounded by four sides.
4.The gap between the wooden box and the machine is filled with foam plastics to prevent the machine
from moving back and forth.
5.Put all accessories in the wooden box and check whether there are missing accessories.
6.Then seal the wooden box and use steel nails to keep a firm eye on the surrounding of the wooden box to prevent the wooden box fromscattering.
7.Finally, fix the wooden box firmly with a bandage.
 
 
Optional accessories
 
Fiber/CO2/UV 3W 5W 10W 355nm Portable Laser Marker Marking Engraver Engraving Machine for Wood Metal/Glass/Plastic/PE/ABS/Electric Cable/3c Products
(1)Rotary fixture:It is strongly recommended that you purchase this accessory, because it is really important. It will be very troublesome
to install the driver after the installation, because you need to use rotation to clamp and fix objects like cups and steel pipes.
(2)Rotating platform:Below is a rotating platform with its own motor. You can fill the platform with accessories to be marked. After the
marking is completed, the platform will automatically rotate and mark the next component.
(3)2D worktable:This is a marking platform that can be moved left and right, and it is a very convenient tool.
(4)Lifting platform:A work platform that can be raised and lowered can raise the height of your marking position, which is a very
convenient tool.
(5)F-theta-lens:The spot quality of the scene is very good, which can greatly improve your marking effect,Our machine brings you a
F-theta-lens for free.
(6)XY Mobile Platform:With the help of the XY moving platform, you can get a larger marking area and still maintain super high
marking accuracy. For example, the general laser marking machine has a maximum marking area of 300x300mm, but you want a
600x600mm marking area. At this time, you need to use the help of XY mobile marking platform to complete the marking.
 
Our service
Pre-sale service
1.* Free sample marking 
For free sample testing, please send us your file, we will do marking here and make video to show you the effect,or send sample to you for checking quality.
2.*Customized machine design
According to customer's application, we may revise our machine accordingly for customer's convenience and high production efficiency.
After-sale Service
1.*Before delivering the machine, we will test and adjust it, so you can use it directly when you get
2.*If you have problems while using, 24hours online professional advice available.
3.*Lifetime software free upgrades.
4.*Fiber laser source we warranty for 3 years ,the other parts warranty for 2 years.
5.*Express delivery to door service
6.*We have professional staff to explain the instructions of the machine and the problems you have encountered
 
FAQ
Q: How to Install the machine?
---A: After receive our machine, customers do not need to install it and can use it directly.

Q: How to operate the machine? is training necessary?
---A: The machine is mainly controlled by software. It's very easy, not complicated. Before shipment, we will make a simple operation manual with pictures and provide user manual of software. Generally speaking, an operator, who is not familiar with fiber laser marking machine before can still operate it very well. According to customers' requests, we can send our technician to customer' plant for machine training or customers can come to our plant for machine training if needed.

Q: In case machine exists problem, how to do after sales service?
---A: We provide two years machine warranty. During the two-year warranty, in case machine exists problem, we will provide parts required with free of charge by express. But as for the parts damaged by artificially, it does not fall within our warranty list.after the warranty, we still provide lifetime service.

Q: What's package?
---A: We have 3 layers package. For the outside, we adopt plywood case. In the middle, the machine is covered by foam, to protect the machine from shaking. For the inside layer, the machine is covered by waterproof plastic bag.

Q: What's delivery time?
---A: Generally speaking, lead time is 5-7 working days after receive the payment.

Q: Can we add a protection cover?
---A: Yes, we can add a protection cover if you need. We can customize the design as customers' requests.
 

You Might Also Like