What Are Shear Studs?
Definition of Shear Studs in Construction

Shear studs refer to the installation of steel pins or grommets, that extend out of the top flange of a
steel support beam. Normally the shear studs are welded, with a spot welder, after the metal deck
is installed over the supporting structural steel. The spot welder will burn through the metal deck
and attach the shear stud directly to the top of the steel beam.

The Purpose of the Shear Stud is to provide a structural connection between the poured in place
concrete slab and the structural steel. This structural connection distributes any shear forces that
the structure may incur. Without the shear studs in place, there is a slip plane between the concrete
slab, the metal deck and the structural steel framework of the project. The structural engineer will
determine, which beams will have the shear studs, the size of the studs as well as the number of
studs to be installed. There are specialized subcontractors that will install the shear studs. The test
for the shear studs integrity is simply striking the side of the shear stud with an iron mallet. This will
ensure that the stud has been properly welded to the beam, if not, the stud will simply break off at
the point of intersection with the steel beam. The stud will have failed due to a shear force .

Process flow

Cold Forging

Annealing treatment  -> wiredrawing -> clod forging -> make welding spot  -> Packing

Mechanical properties(according GB/T 6478 STANDARD)

Tensile strength:≥400N/mm2

Yield strength:≥320N/mm2

Elongation:≥14%
 

ML18A M10 to M25 
Seismic Wedge Anchors

Item 3 : ANSI ML15A / ML18A M10 to M25 Seismic Wedge Anchors

Shear Connector Weld Studs are unthreaded with an upset head. Designed to interconnect the
concrete slab to the load bearing steel beams. Because of the inter connection or composite
construction resists shear loading between the concrete and steel beams. Meets with AWS and
all other applicable specifications. Used in all types of concrete connections. They can be welded
to flat or vertical surfaces, or to the inside or outside of an angle.

Material - Low carbon steel, ASTM A29, 1010-1020. Also available in a weldable stainless steel.
Type 302 is the most commonly used. Other grades available on request. Please contact us for
your specific needs.

Length: Length listed is before weld. Stud diameters less than 5/8" will be approximately 1/8" shorter
after weld - Stud diameters 5/8" - 3/4" will be approximately 3/16" shorter - Stud diameters 1" will be
approximately 1/4" shorter after weld.

PACKING

QBH BULK

20-25KG/CTN,36CTNS/PALLET

20-30KG/BAGS,36BAGS/PALLET

ONE TON/BOXES

50KG/ IRON DRUM,12 IRON DRUMS/PALLET

QBH SMALL PACKING

Packing in small boxes according to customer's requirements

Packing in plastic bag according to customer's requirements

QBH PALLET TYPE

SOLID WOOD FUMIGATION PALLET

EURO Pallet

THREE SPLINT PALLET

WOODEN BOX

Free Samples for Standard Fastener from Jiaxing City Qunbang Hardware
 We Promise:
1.High quality
2. Competitive price
3. The shortest delivery
4. The fastest response
5. The best service

FAQ
1.What's your experience like?

Our general manager has been engaged in the export of fasteners since 2005. 
Our team can provide you with professional fasteners selling and smooth export services.

2.How about your price?
High quality products with reasonable price. Please give me a inquire, We will quoted you a price for you refer at once.

3. How do you control your quality?
We require the quality control department to inspect every production link of each shipment. And we can provide you MTC and mill certificate when the goods is finished.

4.How about your delivery time?
General speaking, if the goods is in stock, we can delivery them with 2-5days, If the quantity is 1-2container, we can give you with 18-25days,if the quantity is more than 2 container and you are very urgent, we can let factory priority produce your goods.

5.What is your packing?
Our packing is 20-25kg for one carton,36 or 48pcs cartons for one pallet. One pallets is about 900-960kg, We also can make customer's logo on the cartons. Or we customized cartons according to customers' requirement.

6.What is your payment term?
We can accept T/T,LC for general order ,Paypal and Western union for small order or samples order. 


Awaiting for your kind inquiry! Thanks & best regards!

For more information:  http://qbfastener.en.made-in-china.com