Concrete Floor Leveling Machine Laser Screed

China Concrete Floor Leveling Machine Laser Screed, Find details about China Concrete Laser Screed, Laser Screed Concrete from Concrete Floor Leveling Machine Laser Screed

Model NO.
FJZP-200
Control Effect
Plane, Slope or Dual Slope (Three-Dimensional)
Width
2500mm
Paving Mode
Paving Auger
Screed Plate Height
330mm
Trademark
FURD
Specification
ISO: 9001 CE
Origin
Shandong
Model NO.
FJZP-200
Control Effect
Plane, Slope or Dual Slope (Three-Dimensional)
Width
2500mm
Paving Mode
Paving Auger
Screed Plate Height
330mm
Trademark
FURD
Specification
ISO: 9001 CE
Origin
Shandong
The laser screed is used in large area concrete construction, such as workshop, supermarket, warehouse, airport, and playground and so on. The laser screed can satisfy the construction requirements of large area and high planeness and levelness.

1.Used high accuracy laser device, close loop control technology and precision integrated hydraulic system, and microcomputer automatic control.
2.Screed assembly is hydraulic controlled. Integrated with laser system and computer control system, the machine will self-level and finish the screeding work with high efficiency.
3.The laser transmitter which measures the elevation is independent located, so there is no worry about the accumulative error. Compared with the traditional wy, the construction joints will be greatly reduced, so the maintenance cost and slab use will be down greatly.
4.The flat and dual slope can be fully automatic controlled by the transmitter. For the complex floor which has high requirement for drainage, the 3-D floor processing system can be used.
5.The forward-seated operation can widen operator vision, reduce the labor intensity and improve working efficiency.
6.Steering, forward and reverse of the machine are all controlled by the integrated handles. Operation buttons and controller which are located on the one side of th seat, is user-friendly.

Model
FJZP-200 
EngineLeveling System
Engine ModelHonda GX630, Electric StartWidth2500mm
TypeGasoline Engine, 
OHV, double cylindrer
Paving ModePaving Auger
Power20HP/3600rpmPower AugerHigh Torque
Hydraulic Motor
Fuel Tank Capacity40LCentrifugal Force500N
Lubricant1.5LVibration Frequency50Hz
Fuel Consumption313g/kWhScreed Head TypeFixed
Travel SystemScreed Plate Height330mm
DriveHydraulic motor,
Four-wheel drive
Paving Depth30-200mm
WheelSolid puncture proof tyreTranslational Range500mm
Speed0-70m/minOperation
Laser ControlForward,
Backward
Handle Control, CVT
ControlMicrocomputer
Laser scanning
SteeringHydraulic Control
Control EffectPlane, slope or dual slope
(three-dimensional)
Cleaning System
Dimensions and WeightPower Hydraulic Motor
Dimensions2554*2500*2360mmTheoretical Flow20L/min
Weight1080kgRated Pressure7MPa