Products

Darlly High Flowment PP Melt Blown Replacement Filter Element

China Darlly High Flowment PP Melt Blown Replacement Filter Element, Find details about China Spun Filter Cartridge, Filter Element from Darlly High Flowment PP Melt Blown Replacement Filter Element

Model NO.
DLPP HF
Length
9.75", 9.87", 10", 20", 30", 40"
Flow Pattern
Outside to Inside
Warranty of Core Components
1 Year
Brand Name
Blueflo
Seal Material
Silicon/EPDM/NBR/Viton
Trademark
Darlly
Transport Package
POF/ Shrink Wrapped/Polybag
Specification
SGS
Origin
Zhejiang, China
HS Code
84219990
Model NO.
DLPP HF
Length
9.75", 9.87", 10", 20", 30", 40"
Flow Pattern
Outside to Inside
Warranty of Core Components
1 Year
Brand Name
Blueflo
Seal Material
Silicon/EPDM/NBR/Viton
Trademark
Darlly
Transport Package
POF/ Shrink Wrapped/Polybag
Specification
SGS
Origin
Zhejiang, China
HS Code
84219990
Darlly Melt Blown Polypropylene Filter Cartridge

Darlly High Flowment PP Melt Blown Replacement Filter Element
Darlly High Flowment PP Melt Blown Replacement Filter Element
Darlly High Flowment PP Melt Blown Replacement Filter Element
Three Layers PP Melt Blown Sediment Pre-filter
DLPP series Melt Blown Filter Cartridge is the standard one of Darlly melt blown filter cartridge series. It is fusing and intertwined of polypropylene resin without any chemical glues. The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration. As the fiber and density form high filtration rating and pollutants holding capacity on diameter of filter cartridge, low pressure drop, gradual changing deep filtration structure with loose outside and close inner, strong particulate holding capacity, it can remove contaminant effectively, such as suspended substance, particulate and rust, providing efficient filtration and long service life.

Features
- Three layers structure cartridge offers high dirt holding capacity,longerservice life
- Formed by thermal bond without using any binders and adhesives.
- 100% Pure Polypropylene will not cause any pollution to water
- Wide Chemical compatibility
- Groove design to extend the filtration surface area.
- All kinds of adaptors are available.
- FDA compliance material

Specifications
Outside Diameter63mm, 115mm or up to customers' request
Inside Diameter28mm,30mm
Length 9.75",9.87",10, 20, 30, 40, 50, 60
Filter mediaPP
End capsPP
CoresPP
Gaskets/O-ringSilicone, EPDM, NBR, Viton
End Cap TypeDOE/222 FLAT/222 FIN/ 226 FLAT/ 226 FIN
Removal Rating1/3/5/10/25/50/75/100/150 μm
Max. Operating Temperature65ºC
Max. Operating DP2.0 Bar@21ºC
 

Darlly High Flowment PP Melt Blown Replacement Filter Element

You Might Also Like