High Flow Pleated/Oil Filter Cartridge for Circulated Water Treatment

China High Flow Pleated/Oil Filter Cartridge for Circulated Water Treatment, Find details about China Filter Cartridge, High Flowment Filter Cartridge from High Flow Pleated/Oil Filter Cartridge for Circulated Water Treatment

Model NO.
DLSHF
HS Code
84219910
Model NO.
DLSHF
HS Code
84219910
high flow pleated/oil filter cartridge for circulated water treatment
High Flow Pleated/Oil Filter Cartridge for Circulated Water Treatment
General  Description
SHF Series Filter Cartridge is a replacement cartridges for the depth filtration and other 2-1/2" diameter cartridges for the high flow applications. Pre-Filtration for RO system is an example. Up to 1300 LPM flow rate per cartridge reduced the number of filter cartridges and the dimension of the filter housing required. Water treatment volume per Super-High Flowment filter cartridge equals to 10x40" length, 2-1/2" diameter cartridges. Inner O-ring insures no bypass and handle design makes the installation easier.
Applications
High Flow Pleated/Oil Filter Cartridge for Circulated Water Treatment


- Prefiltration of RO, Pretreatment of sea water desalination
- Condensed water treatment for power plant
- API, solvents, and water filtration in BioPharm market
- The filtration of bottled water, high Fructose, edible oil, soft drinks, and milk
- Automotive Paints, inks, CD/DVD, magnetic media, Petrochemical, Refineries
- Microeletronics, film, fiber and resin

Features
- High dirt holding capacity, longer service life
- Less cartridge change out to save the labor cost
- O-ring design cause no bypass to ensure the filtration efficiency
- Easy handing result in less manpower
- Wide chemical compatability for different applications

Specifications:
Dimensions
Outside Diameter: 6 inch(152mm)
Inside Diameter: 3.5 inch(89mm):
Length:  40 inch(1016mm)
Material Of Constructions:
Filter media: Polypropylene, Glass Fiber;
Support/Drainage: Polypropylene
End Cap Material: Glass Fiber reinforced PP
Seal Material: EPDM

Performance:
Removal Rating: 1, 4.5, 6, 10,20,40,70,100µm

Maximum Operating Temperature: 82° C
Maximum Differential Pressure: 3.4Bar, 82° C
Suggested Maximum flow rate: 1300 LPM
Code#Media TypeCode=Removal RatingCode#O-Ring MaterialCode+Connection Type
PPPolypropylene11μmEEPDMASingle O-ring
GFGlass fiber4.54.5μm  BDouble O-ring
  66μm    
  1010μm    
  2020μm    
  4040μm    
  7070μm    
  100100μm