Blow Film and Extrusion Grade HDPE/PE Virgin and Recycled

China Blow Film and Extrusion Grade HDPE/PE Virgin and Recycled, Find details about China HDPE Resin, High Density Polyethylene from Blow Film and Extrusion Grade HDPE/PE Virgin and Recycled

Basic Info.

Model NO.

HDPE EX5

Plastic Forming Method

Blow Molding

Color

White

Product

Virgin and Recycled

Grade

Blow and Injection

Trademark

sinopec

Transport Package

25kg/Bag

Specification

COA

Origin

China

HS Code

3901100090

Model NO.

HDPE EX5

Plastic Forming Method

Blow Molding

Color

White

Product

Virgin and Recycled

Grade

Blow and Injection

Trademark

sinopec

Transport Package

25kg/Bag

Specification

COA

Origin

China

HS Code

3901100090

Product Desciption

HDPE
High density Polyethylene (HDPE): is a highly crystalline non-polar thermoplastic resin produced through the copolymerization of ethylene and a small amount of α-olefin monomer. HDPE is synthesized under low pressure and is therefore also called low-pressure polyethylene. HDPE is mainly a linear molecular structure and has little branching. It has a high degree of crystallization and high density. It can withstand high temperatures and has good rigidity and mechanical strength and anti-chemical corrosion.

Properties:
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of
0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good
mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.

Item	Test conditions [state]	Test method	Data	Unit
Density		ASTM D 792	0.956	gr/cm3
MFR	190ºC/2.16kg	ASTM D 1238-7 condition E	20	gr/10min
Elongation at break point.		ISO R527-Type 2speed D	900	%
Flexural modulus		ASTM D 790-71	1000	MPa
Tensile strength yield point		ASTM D 638-72	22	MPa
Pendulum impact strength (notch)		ASTM D 256-73B	10	KJ/m2
Hardness		ASTM D 2240-75	66	Shore D