Products

Manganin Shunt In Energy Meter

China Manganin Shunt In Energy Meter, Find details about China Manganin Strip, Manganin Foil from Manganin Shunt In Energy Meter

Model NO.
6J13
standard
GB/ASTM/JIS/BIS/DIN
surface
bright
Density
8.4(g/cm3)
MOQ
20kilograms
OEM
YES
Trademark
Taknkii
Transport Package
in Roll, in Woodencase Outside
Specification
0.01-3mm*0.3-600mm
Origin
China
HS Code
7409400000
Model NO.
6J13
standard
GB/ASTM/JIS/BIS/DIN
surface
bright
Density
8.4(g/cm3)
MOQ
20kilograms
OEM
YES
Trademark
Taknkii
Transport Package
in Roll, in Woodencase Outside
Specification
0.01-3mm*0.3-600mm
Origin
China
HS Code
7409400000
Manganin Strip/Sheet/Foil /Cu86nn13ni2 Strip 
 
Product Description
Shunt Manganin widely used for Shunt resistor with the highest requirements, shunt manganin has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards.
 
Chemical Content, %
NiMnFeSiCuOtherROHS Directive
CdPbHgCr
2~511~13<0.5microBal-NDNDNDND
 
Mechanical Properties
Max Continuous Service Temp0-100ºC
Resisivity at 20ºC0.44±0.04ohm mm2/m
Density8.4 g/cm3
Thermal Conductivity40 KJ/m·h·ºC
Temp Coefficient of Resistance at 20 ºC0~40α×10-6/ºC
Melting Point1450ºC
Tensile Strength(Hard)585 Mpa(min)
Tensile Strength,N/mm2   Annealed,Soft390-535
Elongation6~15%
EMF vs Cu, μV/ºC (0~100ºC)2(max)
Micrographic Structureaustenite
Magnetic Propertynon
Hardness200-260HB
Micrographic StructureFerrite
Magnetic PropertyMagnetic
 
Resistance Alloy- Shunt Manganin Sizes / Temper Capabilities
 Condition: Bright, Annealed, Soft 
 Wire &Ribbon diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
 Rod, Bar diameter 1mm-30mm 
 Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
 Also enameled condition is available

Product Description:
1 .Material:  6J13 manganin and pure copper (reach the GB614599 F2 standard)
2. Welding mode: Electric beam welding shunt. Braze welding with Ag-based alloy as solder.
3. Resistance value tolerance: ±5%
4. Shunt type: The shunt should be mountable type with holes for screw fixing
5. Termination: Integrated lead wires are available

6. Temperature: Independent from temperature variation with low TCR value,

7. Characteristics: TC < 50PPM/K

8. Aging: 10 hours under 120 deg.

9. Power loss: <50 mill watt

 Manganin Shunt In Energy Meter

You Might Also Like