Simple manual solder printer
Notice: do not contain the stencil frame.
Simple manual stencil printer machine is small and convenient, especially for new product trial,and some low-volume electronics factory, the production of many varieties, affordable, easy to use,is essential for the production of small electronic tools.
Feature:
1.can be flat surface printing. manual operation,easy to adjust, accurate and reliable
2.simple manual stencil printer machine can be used in several specifications, suitable for all sizes of hand-printed silk screen.
Four sizes for your choosing:
| Model | Max print area(mm) | G.W. |
| small printer | 300*240mm | 12kg |
| medium printer | 320*440mm | 13kg |
| large printer | 600*420mm | 16kg |
| large printer | 700*500mm | 22kg |
Installation instruction:
1.Install screw lever, wire clip, fixed block and counterweight lever in sequence according to the graphic presentation below:
2.rotate counterweight lever while adjusting tight nut.
Operation instruction:
1.put steel stencil in the wire clip, and tighten the steel stencil by its handwheel
2.put the simple DIY positioner on the printing table and also put the PCB accordingly.Adjust the handle on the operation platform to make the holes on PCB match the holes on the steel stencil.
If you need high precision model, here recommend you PM3040 for reference , could get it's info by browsing our showroom , or send us inquiry directly.
Also could matched with : pick and place machine + reflow oven.
Pick and place machine series: TM245P-standard TM245P-advanced TM240A TM220A
Reflow oven: T962A T-962C T-960 T-960E T-960W