One-Component Water-Basic Acrylic Silicone Sealant

China One-Component Water-Basic Acrylic Silicone Sealant, Find details about China Acrylic Silicone Sealant, Gap Filler from One-Component Water-Basic Acrylic Silicone Sealant

Model NO.
w88
Bonding Material
Composite Panel
Volume
280-300ml
Shelf Time
12 Months
Trademark
Glorystar
Transport Package
24PCS/Carton; 1900 Cartons/20container
Specification
ISO9001: 2000
Origin
Guangzhou
HS Code
3506100010
Model NO.
w88
Bonding Material
Composite Panel
Volume
280-300ml
Shelf Time
12 Months
Trademark
Glorystar
Transport Package
24PCS/Carton; 1900 Cartons/20container
Specification
ISO9001: 2000
Origin
Guangzhou
HS Code
3506100010

One-Component Water-Basic Acrylic Silicone Sealant
Glorystar w88 is one-component water-basic resinous bond. It has excellent weather ability suitable for both interior and exterior which can be use to meet a variety of sealing needs including plastic, metal, wood, concrete etc. It is easy to use and paintable(after 30 minutes).Can be painted and vanished.


Product Introduction:
· One component, high modulus, neutral cure
· No corronent for the metal, coated glass, concrete and marble
· Excellent resistance to weathering performance.
· Outstanding mechanical strength.
· Good cohesion to most building materials.
· Nice compatibility with other neutral silicone sealant.

Application:
· Mainly used for getting cohesion between glass curtain wall and aluminium structure, and caulking to seal with the glass curtain wall.
· Being able to connect glass directly to the metal surface as a single accessory, to meet the requirements of curtain wall design with hidden frame.

Technical Data
Performance Index
Sagging Degree(mm)≤ 2mm
Extrusion Performance(s) ≥80ml/min
Surface Drying Time(min) ≤30min
Stretching Binding Strength(Mpa)≥ 0.2mpa
Maximun Strength Elongation≥ 200%
 Displacement Capacity(%) ≥20%
 hardness HsA ≥15


One-Component Water-Basic Acrylic Silicone Sealant


How to use:
· Prior to use, you should test the compatibility of contact material and bond strength, after confirmed qualified, then construction.
· There should be no moisture dust oil on the material's surface, otherwise, you have to use solvents to clean, let it dry before construction.

Restriction:
· No construction on the wet surface.
· No used on the oil or oil leakage surface.


Note:
· Stored dry at room temperature.
· Can not be used directly in the new cement concrete surface.
· If contact eyes, using plenty of water or take medical treatment at once.
· Large difference in temperature/humidity, the volume of the product ± 9ml are normal.

Directions for use:
Ensure all the surfaces to be sealed are clean, dry and grease-free.

Cut off the tip of the small threaded protrusion on top of the tube. Screw the pointed nozzle to the remaining.

Apply sealant with caulking gun. The sealant will form a layer on the surface in approximantely 10 minutes at 25 degree and will be dry to touch in 1 hour. It will be fully cured in 24-48 hours depending on the surfaces to be sealed.

Warning:
Ensure good ventilation when used indoors. Avoid direct contact with skin. If exposed to eyes, flush with water and consult with a physician immediately. Keep out of reach of children.
Do not use for structural glazing applications.

Storage:
Packing: 300ml
Colour: White
Storage: Temperature should not exceed 30 degree for prolonged periods.
Caution: Use within 9 months.
Appearamce
White gypseous glue

One-Component Water-Basic Acrylic Silicone Sealant