Main Features
1. Converts the tyre to Nitrogen at the touch of a button **
2. Auto-Start Inflation *
3. Over Pressure Setting (OPS)
4. Single Tyre Application
5. Suit for: Motorcycle, Car, Light Truck
Technical Data Summary
Dimensions (Height*Width*Depth)
1255mm*700mm*435mm
49.4''*27.6''*17.1''
Net Weight 87kg/191.8lbs
Gross Weight 104kg/229.3lbs
Packing Size(Height*Width*Depth)
1380mm*730mm*510mm
54.3''*28.7''*20.1'''
Power Requirement 100-240VAC 50/60Hz
Power Consumption 30VA
Operating Temperature Range -20/-4° F to 70 / 158° F
Compressed Air Input Range 87-123PSI/6-8.5bar /600-850kPa
Nitrogen Purity 95-99+%
Nitrogen Output 58L/min(2.0cfm)@116PSI/8bar/800kPa
Maximum Nitrogen Pressure in Tank 102PSI/7bar/700kPa
Specifications
1. Generates nitrogen from your compressed air
2.2 Pre-Filters
3.50L/13.2gal (us) internal nitrogen storage tank
4. Auto-start inflation
5. Automatic zero drift adjustment
6. Remain at last setting
7. Audible and visual end of the cycle signal indicators
8. Self-diagnostic features
9. Vandal resistant mechanical switches
10. Large backlight LCD display
11.1 Nos. *10M/32.8ft standard hose with single clip-on open type chuck
12. Comprehensive diagnostics and error reporting
13. Nitrogen purge and fill cycle (N2P)
14. Nitrogen purity test port
15. Adjustable over pressure setting (OPS)
16. Adjustable number of cycles
17. Adjustable lower purge pressure limit
18. Auto Shut-Off
19.1Nos Nitrogen Outlet to connect the unit and your tyre inflation gun
Operation Steps
1. Set final target pressure using the + and - buttons. The LCD screen will show the target pressure.
2. Connect air hose to tyre valve stem.
3. FOR TOP-OFF ONLY: Push the "FILL/PURGE" button once.
FOR NITROGEN CONVERSION: Push and hold the "FILL/PURGE" button for 2 seconds until the LCD screen shows "N2P".
4. When unit "beeps" and the LCD screen flashes the target pressure, tyre inflation is complete.