Applicatioin

Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made. 

They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments. 

The pump should be installed in an enclosed environment, or at least sheltered from inclement weather

Operating Conditions

Liquid temperature up to 60 degree

Ambient temperature up to 40 degree

Total suction lift up to 8m

Motor

Two-pole induction motor (n=2850 r. P. M)

Insulation Class B

Protection IP44

Continuous service S1

Thermal protector

Single-phase 220V/50Hz, 60Hz if request

Component Construction

Pump body: Cast iron, with brass/AISI304 SS insert if request, reduces the risk of impeller seizure

Pump support: Cast iron, with brass/AISI304 SS insert if request, reduces the risk of impeller seizure

Motor housing: Aluminum, Sheet steel for CP130

Impeller: Brass

Motor shaft: Carbon steel, AISI420/304 SS if request

Mechanical seal: Ceramic/Graphite

Bearings: 6201 RZ/6201 RZ (0.5HP. VP5M by ZZ), 6202 RZ/6202 RZ (0.75HP & 1HP)