Decription For the CD Type Construction Hoist 2ton electric wire rope hoist
1.Type CD1,MD1 wire-rope electric hoist is a kind of small-lifting equipment
2.it can be mounted on single beam overhead crane ,gantry cranes, jib type CD
3.electric hoist as only one normal speed which can satisfy normal application
3.It is widely used in factories, mines, harbors, warehouses, cargo storage area and shops
4.essentially in raising working efficiency and improving working conditions.
electric hoist parameter:
1. Reducer
Third-class dead axel helica gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel;case and case cover with precise assembly and good seal are made of quality cast iron.The reducer is independent, so its easy to load and unload it.
2. Control Box
It has device with up an down stroke protection of break off limiter and can cut off main circuit in an emergency,which ensures safe operation of electric block.Electric elements are of long service life and operational safety.
3. Steel Wire Rope
It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use.
4. Conical Motor
The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor s load duration factor is 25%; the motor uses B frade and F grade insulation and its grade of protection isIP44/IP54.
5. Button Switch
Its hand-operated, easy to handle,and has two modes of cord operation and cordless remote control
6. Hooks
Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield.
7. Power
Operating voltage 220-440V, 50/60Hz, 1-3 phase.
Low voltage control 36V is standard.
High efficient energy-saving motor, asbestos free brake system. 2-speed motor available.
Sturdy pole change motors with cylindrical rotors and integrated safety brakes.
8. Limit Switch
Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out.
9. Pushbutton Swith
Pushbutton swith is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked.
10. Hoisting Gear:
Ligh tweight gear units with silent running flat bevelled gears deliver the torque required.
Type | Loading capacity | Lifting height | Lifting speed | Travelling speed | Power supply |
Single speed | Dual speed |
Ton | m | m/min | m/min | V-HZ-Phase |
CD1/MD1 | 0.25 | 3~9 | 8 | 0.8/8 | 20 | 220~440V-50/60HZ-3phase |
0.5 | 6~12 | 20/30 |
1 | 6~30 |
2 | 6~30 |
3 | 6~30 |
5 | 6~30 |
10 | 9~30 | 7 | 0.7/7 |
16 | 9~30 | 3.5 | 0.35/3.5 | 18 |
| 9~36 | 4.2 | 0.42/4.2 | |
20 | 9~24 | 3.3 | 0.33/3.3 | 14 |
9~30 | 4.2 | 0.42/4.2 |
32 | 9~24 | 3 | 0.3/3 | 16 |
Above parameter just for your reference,our hoist can be customized design Max.80ton base on your demands. |
We sincerely hope to build a cooperative and mutual beneficial business relationship with you!