Products

Tealth 1: 1 Low Speed Handpiece Contra Angle

China Tealth 1: 1 Low Speed Handpiece Contra Angle, Find details about China Low Speed Contra Angle, 1: 1 Contra Angle from Tealth 1: 1 Low Speed Handpiece Contra Angle

Model NO.
CIN-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Rate
1:1
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Model NO.
CIN-01C
Application
Adult, Child
Loading Way
Gland Type
Head Diameter
Middle Head
Exhaust Way
Internal Exhaust
Number of Holes
Two Holes
Connection
Without Quick Connector
Rotating Speed
Low-Speed Handpiece
Noise
Less Than 70dB
Gear Rate
1:1
Trademark
TEALTH
Transport Package
Plastic Box
Specification
Aluminum, stainless steel
Origin
China
HS Code
90184100
Name: Low speed 1:1 contra angle
Model : CIN-01C
Tealth 1: 1 Low Speed Handpiece Contra Angle
Packing List: 
- Push Button Contra Angle handpiece: 1 pcs 
- Cap Spanner: 1 pcs 
- English manual: 1 pcs 

Features:
1.Push button chuck type,Kavo type internal head
2. Internal irrigation, perfect cooling  systerm
3. Match up with FG bur (Φ1.60mm) and CA bur head(Φ2.35mm)
4. 4 holes connector, stanard E-type connection
5.Imported bearing from Japan 
Tealth 1: 1 Low Speed Handpiece Contra AngleTealth 1: 1 Low Speed Handpiece Contra Angle
Handpiece inserting & removal
Inserting
Insert the E-type handpiece onto the motor and turning all the way until it click to stop.

Removal
Grip both handpiece and motor respectively, pulling and separating.
Tealth 1: 1 Low Speed Handpiece Contra Angle

Maintenance & Care
After each treatment, sterilizing handpiece in autoclave according to the following steps:
1. Remove the bur, use brush to clean handpiece, then cleaning outside of handpiece with alcohol solution.
2. Lubricate handpiece.
3. Package into autoclaving pouch.
4. Autoclave the handpiece for 12 min at 135ºC.
5. Dental handpieces cannot be soaked in a disinfectant with acidic liquid. it will seriously damage the bearings and handpiece internal components
6. Do not use an ultrasonic cleaner to clean the dental handpiece.
7. It is not recommended to repair the dental handpiece by little experience person. For repairing, please return to the factory or send to the designated after-sales service maintenance office.

 

You Might Also Like