S24-30141 S24-30142 S24-40057 S24-40058 S24-40332 S24-40333 S24-30143 S24-30144 S24-40059
S24-40060 S24-40334 S24-40335 S24-30145 S24-30146 S24-40061 S24-40062    S24-40336 S24-40337
S24-40331 S24-30147
Parker Denison cartridge.
1. Parker Denison pump T6 Single Vane Pump
2. Model T6E, T6ER, T7ERS, T6ERM T7ES, T6EM T7ES, T7BS T7E T7ES T7DS T7DRS,
T6C, T6CM T6CR T6CRM T6CRM T6CR,
T6D, T6DM  T6DR, T6DMY T6DRMY T6DRM   
T7dbs T6ccmw T7bbs T67cb T6cc T6ccm T67cbw T6ccw T67db T6dc 
T67dc T6dcm T6dcw  T67dcw T6dcmw T7dds T6dds T67eb, T7ebs 
T6ec T67ec T6ecm T6ed T7eds T6edm T6ees T7ees T6ee T7ee T7db       
3. Interchangeable Vane Pump cartridge displacement as follow:
    T6C vane pump: 003, 005, 006, 008, 010, 012, 014, 017, 020, 022, 025, 028, 031
    T6D vane pump: 014, 017, 020, 024, 028, 031, 035,038, 042, 045, 050
    T6E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085
    T7E vane pump: 042, 045, 050, 052, 057, 062, 066, 072, 085  
4. Feature below. 
The high pressure vane pump incorporates the design of vane pin holdout.
They are applicable for those hydraulic machineries that demand high rotation pressure and low noise level.
The vane pump series are designed for applications in die casting machines, injection molding machines and other special construction equipments.

Hydraulic fluid: Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions.

The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in an open circuit the tank temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X°F (X°C) an operating temperature of 140°F (60°C) is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68.Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the tank temperature. At no point in the system may the temperature be higher than 240°C (115°C) for sizes 5 to 200 or 195°F (90°C) for sizes 250 to 500.If the above conditions cannot be maintained due to extreme operating parameters, we recommend flushing the case at port U (size 250 to 500).