Bare Conductors All Aluminium Alloy Conductor Overhead Power Cable
Product Description
 
 All Aluminum Alloy Conductor (AAAC) Cables
Application of AAAC 120mm2
AAAC is mainly used as bare overhead transmission cable and as primary and secondary
distribution cable. It is also suitable for laying across basins, rivers and valleys where
special geographical teatures exist.
standard of AAAC 120mm2
Basic design to BS 3242 / BS EN 50182 / IEC 61089 / ASTM B 399/B 399M / DIN 48201
-6 standards
 
Construction of AAAC 120mm2
AAAC cable bvconsists of aluminum alloy wires. The aluminum alloy wires are concentrically
stranded.
This section deals with heat-treatable magnesium silicon type aluminium alloys to the
applicable International Standard, the electrical and mechanical properties of which all
fall within the values suggested by relevant standard. Conductors to all other recognized
specifications can also be supplied. The alloys referred to have higher strength but lower
conductivity than pure aluminium. Being lighter, alloy conductors can sometimes be used
to advantage in place of the more conventional ACSR; Having lower breaking loads than
the later, their use becomes particularly favourable when ice and wind loadings are low.
.
  ELECTRICAL PROPERTIES of AAAC120mm2
  linear Expansivity 23 x10-6 (°C) 
 
 Construction Parameters of AAAC 120mm2
DIN 48201 part 6 
   (*)Note: The values of current rating mentioned in above Table are based on wind velocity of 0.6 metre/second, solar heat radiation of 1200 watt/metre2, ambient temperature of 50° C & conductor temperature of 80°C.

Workshop: