Guide Cylinder for Inground Lift

1. For inground lifts
2. Chromed tube surface with thickness 0.03-0.05 mm which is qualified after 72h neutral salt spray test
3. The throttling device installed inside of the internal cylinder not only enables car lifts to rise quickly and fall slowly, but also saves cost compared with installing throttling valves outside.

Product Description
Features:
The rod we can plate hard chrome.
The seals we import the famaous brands:NOK,Hallite,Parker. Aston.
Machining Capacity:
Bore: 10-500mm
Rod: 10-6000mm (single stage)
Over 10000mm for telescopic 
Company Introduction
1. Built in 1973
2. Total area 456000m²
3.  400 employees, 70 engineers
4. More than 400 sets equipment
5. National Patents: 71

Management System
ISO9001 System                     ISO/TS16949System                              IPR System

Quality Control
1. We use Solidworks to design cylinders and do force analysis.
2.  Inspection process: incoming inspection, sampling inspection, process inspection and pre-shipment inspection.
3. Before the production, we will do chemical composition tests. The uninspected materials are stored in special positions and all inspected materials are able to be traced by size, supplier and date.
4. During the production, the process cards are placed around to make sure that the workers understand every step clearly. The products are marked for tracking.


Packing & Delivery
The products are fully protected by metal shelves, wood boxes and plastic fillers.


Products Application
Our products are mainly used in following industries like car lift, agricultural machines and environmental vehicles. With high quality products and considerate after-sales service, we have established a well-known reputation.

Sales Network
Our products have been exported to North America, Europe, Russia and Southeast Asia, etc. We have established a branch in USA.



FAQ
Q1: Are you a trading company or manufacturer?
A1: We are the manufacturer with Exporting License.

Q2: How long have you been in Hydraulic Cylinder industry?
A2: Our factory is built in year 1973 and start by manufacturing Pneumatic Cylinder. From year 1985, we start manufacturing Hydraulic Cylinder.

Q3: How long is your warranty period?
A3: We offer 13 months warranty period after on board.

Q4: How long does it take to process orders?
A4: It usually takes 20-30 days to process. We don't have stock.

Q5: What's your cylinder PPM?
A5: 5000 PPM. We do 100% inspection before delivery.

Q6: Have you been exported to overseas?
A6: We have been exporting to USA, Canada, Germany, Italy, France, Russia, etc.


Contact: 
Ada Sun
 
Website: fasthydraulics.en.made-in-china.com fasthydraulics.en.made-in-china.com