Products

Full Automatic Bottle Inverter Sterilizer for Beverage

China Full Automatic Bottle Inverter Sterilizer for Beverage, Find details about China Sterilizer, Beverage Sterilizer from Full Automatic Bottle Inverter Sterilizer for Beverage

Model NO.
LG
Filling Principle
Pressure
Packaging Container Lifting Structure
Pneumatic Lifting
Structure
Rotary
Packaging
Bottle
Packaging Material
Plastic
Use
Bottle Inverter Sterilizer
Uses
to Sterilize Interspaces in The Mouths or Capsules
Material
Stainless Steel 304
Automation
Full Automatic
Trademark
jinrong
Transport Package
Wooden Case
Specification
ISO9000 CE
Origin
Jaingsu Province Zhangjiagang City
HS Code
8422301090
Model NO.
LG
Filling Principle
Pressure
Packaging Container Lifting Structure
Pneumatic Lifting
Structure
Rotary
Packaging
Bottle
Packaging Material
Plastic
Use
Bottle Inverter Sterilizer
Uses
to Sterilize Interspaces in The Mouths or Capsules
Material
Stainless Steel 304
Automation
Full Automatic
Trademark
jinrong
Transport Package
Wooden Case
Specification
ISO9000 CE
Origin
Jaingsu Province Zhangjiagang City
HS Code
8422301090
This machine is mainly used to sterilize the interspaces which can not be
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
This machine is mainly used to sterilize the interspaces which can not be
reached by high temperature materials in the mouths or capsules of bottles after the beverage like tea or juice has been hot filled and closed over. After the product being filled and closed over, the bottle shall be inverted 90°automatically and put flatware by the machine, and the inner of the bottle shall be sterilized through the high temperature of the materials and then bottle shall be put vertically and enter into the spray cooler. The machine runs steadily and reliably and does no harm to the bottles body while the transmission speed can be adjusted steplessly because the transmission chains are imported to install in the machine.
No.SymptomCauseRemedy
1difference result of sealing-cuttingA. Abnormal air pressure which is lower than 0.5Mpa
B. Bad connection of the knife
C. Insufficient amount of film		A. Check pressure gauge and compressor to find solution
B. Switch off, restore cylinder after exhaustion; ensure no gap exist between  knife and base
C. Adjust time and speed of film-loading
2Off-tracking of conveyer-beltA. Unsteady pole is loose
B. Unsuitable tautness of the conveyer-belt		A. Tighten the above unsteady pole and the below.
B. Adjust driven roller feeding regulator
3Knife cutting the goodsA. Shaping board can not press packing goodsA. Adjust height of board to get appropriate pressure of the board
4Too many wrinkles on the surface of the goods after thermal shrink
  1. Too much remaining film amount
  2. Too wide of shrink film
  3. Too large side areas of the goods
A. Adjust magnetic switches of forward-pushing cylinder to achieve appropriate length of stroke.
B. Select shrink film with appropriate width
C. Normal situation as wrinkles appear on the bottom of two sides
 
 
 
 

You Might Also Like