Products

1100 , 1200 Aluminium/Aluminum Circles for Utensils

China 1100, 1200 Aluminium/Aluminum Circles for Utensils, Find details about China Aluminum Circles for Utensils, Aluminium Circle for Utensils from 1100, 1200 Aluminium/Aluminum Circles for Utensils

Model NO.
1100, 1200
Alloy No.
1050, 1060, 1070, 1100, 3003
Tempers
Ho, H14, H16
Thickness
0.4-5.0 mm
Diameter
80-2500 mm
Earring
<2%
Trademark
Signi aluminum
Transport Package
Wooden Pallet or Wooden Case
Specification
China Standard
Origin
China
HS Code
76061190
Model NO.
1100, 1200
Alloy No.
1050, 1060, 1070, 1100, 3003
Tempers
Ho, H14, H16
Thickness
0.4-5.0 mm
Diameter
80-2500 mm
Earring
<2%
Trademark
Signi aluminum
Transport Package
Wooden Pallet or Wooden Case
Specification
China Standard
Origin
China
HS Code
76061190
1100, 1200 Aluminium Aluminum Circles for Utensils

The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
Low anisotropy, which facilitates deep drawing
Strong mechanical properties
High and homogeneous heat diffusion
Ability to be enameled, covered by PTFE (or others), anodized
Good reflectivity
High strength-to-weight ratio
Durability and resistance to corrosion
Signi aluminum offers circles and shaped blanks in a wide range of alloys, tempers, thicknesses and diameters to meet all likely customer requirements.
 
Aluminium circles
The properties of aluminum circles (or shaped blanks) make them ideal for use in a number of markets including the cookware, automotive and lighting industries:
 
AlloyTemperThicknessDiameter
1050, 1060, 1070, 1100, 3003O, H12, H140.36~10mm20~1200
Remark: special specifications can be produced according to your requirement
 
Dimensions
ParameterRangeTolerance
Thickness for circles (mm)0.71 _ 6.35for 0.71 to 1.4 +/-0.08
for 1.41 to 2.5 +0.1, -0.13
for 2.51 to 4.0 +/-0.13
for 4.01 to 5.00 +/-0.15
for 5.01 to 6.35 +/-0.20
Thickness for ovals (mm)1.75 _ 3.00for 1.75 to 2.5 +0.1, -0.13
for 2.51 to 3.00 +/-0.13
Diameter (mm)102 _ 1250(a) sheared circles +2, -0
(b) punched circles +0.5, -0
Earing< 5% for ' O' temper
< 9% for H12, H14, H16, H18		 
 
Mechanical properties
Alloy (AA)Temper%E (min)
(at 50 mm gauge length)		UTS (mpa)Bend test: radius of bend
(T=material thickness)
MinMax
1050O295595close
H146951251/2T
H184125-1T
1070O2995-close
H146951201/2T
H184120-1T
3003O2590130close
H1451301801/2T
H1641501951T
H183170-3T
 
Chemical composition
Alloy (%)AA 1050AA 1070AA 1100AA 3003
Fe0.400.251.000.70
Si0.250.20(Fr + Si)0.60
Mg0.050.03--
Mn0.050.030.051.00 _ 1.50
Cu0.050.040.050.05 _ 0.20
Zn0.050.040.100.10
Ti0.030.030.050.10 (Ti + Zr)
Cr----
Each (others)0.030.030.050.05
Total (Others)--0.1250.15
Al99.5099.7099.00Remaining
 
Surface quality
Free from scratches, pit marks, rolling bands
Applicable standards
ASTM - B - 209M, Aluminium association _ aluminium standards and data, Hindalco manufacturing limits (as applicable).
Packing
The circles are packed in boxes or pallets with interleave paper, polythene, foam / thermocol. Pallets and boxes are strapped with hoop iron and clips. Silica gel packets are placed in the boxes for moisture protection.
1100, 1200 Aluminium/Aluminum Circles for Utensils
1100, 1200 Aluminium/Aluminum Circles for Utensils
1100, 1200 Aluminium/Aluminum Circles for Utensils
1100, 1200 Aluminium/Aluminum Circles for Utensils
 

You Might Also Like