SUBMINIATURE INTERMEDIATE POWER RELAY
Features:
10A switching capability
1 Form A and 1 Form C configurations
Standard PCB layout
Sealed and flux proofed types available
Enviromental friendly product(RoHS compliant)
Outline Dimensions: 18.4x10.2x15.5mm
CONTACT DATA
| Contact arrangement | 1A 1C |
| Contact resistance | 100mΩ(1A 6VDC) |
| Contact material | AgNi AgCdO |
| Contact rating (Res.load) | 1A | 1C |
| Standard | Senstive | Standard |
| 10A 250VAC/30VDC | 5A 250VAC/30VDC | 3A 250VAC/30VDC |
| 5A 250VAC/30VDC |
| Max.switching voltage | 250VAC 30VDC |
| Max.switching current | 10A |
| Max.switching power | 2500VAC/300W |
| Mechanical endurance | 1x106 times |
| Electrical endurance | 1x105 times |
CHARACTERISTICS
| Insulation resistance | 100MΩ (500VDC) |
| Dielectric strength | Between coil&contacts | 2500VAC 1min |
| Between open contacts | 1000VAC 1min |
| Operate time(at normal.volt.) | ≤8ms |
| Release time(at normal.volt.) | ≤5ms |
| Vibration resistance | 10Hz-55Hz 1.5mm |
| Humidity | 5%-85% RH |
| Ambient temperature | -40ºC¯105ºC |
| Shock resistance | Functional | 100m/s2 (20g) |
| Destructive | 1000m/s2 (100g) |
| Termination | PCB |
| Unit weight | about 12g |
| Construction | Sealed Flux proofed |
OUTLINE DIMENSIONS, WIRING DIAGRAM AND PC BOARD LAYOUT
Remark:1) In case of no tolerance shown in outline dimension; outline dimension≤1mm, tolerance should be ±0.2mm;outline dimension >1mm and ≤5mm, tolerace should be ±0.3mm; outline dimension >5mm, tolerance should be ±0.4mm.
2) The tolerance without indicating for PCB layout is always ±0.1mm.