China Wholesale Nelson Shear Studs for Stud Welding En ISO 13918
China Wholesale Nelson Shear Studs for Stud Welding En ISO 13918, Find details about China Fastener, Connector from China Wholesale Nelson Shear Studs for Stud Welding En ISO 13918
Basic Info.
Model NO.
Round Shear Stud
Length
10-150mm
Sample
Free
Tensile Strength
450n/mm2
Yield Point
350n/mm2
Raw Material
Carbon Steel Swrch15A, Swrch18A, S235j2+C450
Factory/Teade Company
Factory
Trademark
DX/Customizable
Specification
M1.4-M64
Origin
Ningbo, China
Model NO.
Round Shear Stud
Length
10-150mm
Sample
Free
Tensile Strength
450n/mm2
Yield Point
350n/mm2
Raw Material
Carbon Steel Swrch15A, Swrch18A, S235j2+C450
Factory/Teade Company
Factory
Trademark
DX/Customizable
Specification
M1.4-M64
Origin
Ningbo, China
Product Desciption
PRODUCT DISCRIPTION
Shear Connector are typically used in composite steel construction to tie the concrete slab to steel members and resist shear forces between the concrete slab and steel members.
It's one of a classic apply of drawn arc stud welding technology. Widely used in steel constructions, bridges, power station,traffic station, oil and gas station, etc.
ABOUT US Ningbo Dongxin High-Strength Nut Co., Ltd. was established in 1992,located in Ningbo,China .We are a modern fasteners factory,with fully automated production and stereoscopic warehouse. Our company mainly produce high strength fasteners. The products include all kinds of Bolts, Nuts,Washers, Pins, Studs,Tapping/Double end Studs,Threaded rods, Machining parts, Carriage bolts,Screws, and ext. We export to all over the world.Dongxin always put quality first, With continued development , Dongxin has a good reputation in the fastener industry of Oil Field, Petrochemical Industry, Heavy Engineering Industry, Construction Industry and Wind Power Industry. We have been certified by ISO 9001-2015,API-20E(BSL-1 and BSL-2),PED,CE-EN 14399,CE-EN 15048,BV, ISO45001:2018, ISO14001:2015.
WHY CHOOSE US
1.Location Advantage:
Our company locate in Ningbo,China,Ningbo port is one of the largest deep-water ports in the world.
2.Dongxin has a long history and production experience:
We established since from 1992, specializing in the production of Nuts ,Stud bolts and bolts,we always put the quality first,.
3.We have modern and automated production lines:
We are a modern fasteners factory,with fully automated production and stereoscopic warehouse ,We have testing center.We use ERP system management.
4.Keeping progressing always:
We always keeping progressing and innovation at any times,and renewal the staleness equipment if necessary.
5, We always offer the best Services
The fast feedback to customer,on-time deliver orders,be responsible for all of our customer.
COOPERATION
FAQ
Q1: Are you trading company or manufacturing company?
A:We are factory.
Q2:What is your main products?
A:Stud bolts,Heavy Hex Nuts,Structure nuts,Hex nuts, Thread rods, Tapping/Double End Studs;All kinds of Hex Head Bolts, Hex Socket Head Cap Screw with Grade: 8.8, 10.9, 12.9. All kinds of Spring, Flat, Heavy washers with any grade.
Q3:How to order?
A:Send the inquire by email.
Q4:Do you provide samples? Is it free or extra?
A:Yes, we could offer the sample for free charge if the samples in stock but do not pay the air cost.
Q5: What is the delivery ?
A: Sample order's delivery time is 5- 7 days. Container orders are about 15-20 days.
Q6:What's your main market:
A:USA,Canada,Europe,UK,Middle East,Asia and ext.
Shear Connector are typically used in composite steel construction to tie the concrete slab to steel members and resist shear forces between the concrete slab and steel members.
It's one of a classic apply of drawn arc stud welding technology. Widely used in steel constructions, bridges, power station,traffic station, oil and gas station, etc.
GB /T 10433 - 2002 Cheese Head Studs For Arc Stud Welding
| Nominal Diameter d |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
ABOUT US
Ningbo Dongxin High-Strength Nut Co., Ltd. was established in 1992,located in Ningbo,China .We are a modern fasteners factory,with fully automated production and stereoscopic warehouse. Our company mainly produce high strength fasteners. The products include all kinds of Bolts, Nuts,Washers, Pins, Studs,Tapping/Double end Studs,Threaded rods, Machining parts, Carriage bolts,Screws, and ext. We export to all over the world.Dongxin always put quality first, With continued development , Dongxin has a good reputation in the fastener industry of Oil Field, Petrochemical Industry, Heavy Engineering Industry, Construction Industry and Wind Power Industry. We have been certified by ISO 9001-2015,API-20E(BSL-1 and BSL-2),PED,CE-EN 14399,CE-EN 15048,BV, ISO45001:2018, ISO14001:2015.
Look forward to cooperating with you.
WHY CHOOSE US
1.Location Advantage:
Our company locate in Ningbo,China,Ningbo port is one of the largest deep-water ports in the world.
2.Dongxin has a long history and production experience:
We established since from 1992, specializing in the production of Nuts ,Stud bolts and bolts,we always put the quality first,.
3.We have modern and automated production lines:
We are a modern fasteners factory,with fully automated production and stereoscopic warehouse ,We have testing center.We use ERP system management.
4.Keeping progressing always:
We always keeping progressing and innovation at any times,and renewal the staleness equipment if necessary.
5, We always offer the best Services
The fast feedback to customer,on-time deliver orders,be responsible for all of our customer.
COOPERATION
FAQ
Q1: Are you trading company or manufacturing company?
A:We are factory.
Q2:What is your main products?
A:Stud bolts,Heavy Hex Nuts,Structure nuts,Hex nuts, Thread rods, Tapping/Double End Studs;All kinds of Hex Head Bolts, Hex Socket Head Cap Screw with Grade: 8.8, 10.9, 12.9. All kinds of Spring, Flat, Heavy washers with any grade.
Q3:How to order?
A:Send the inquire by email.
Q4:Do you provide samples? Is it free or extra?
A:Yes, we could offer the sample for free charge if the samples in stock but do not pay the air cost.
Q5: What is the delivery ?
A: Sample order's delivery time is 5- 7 days. Container orders are about 15-20 days.
Q6:What's your main market:
A:USA,Canada,Europe,UK,Middle East,Asia and ext.
You Might Also Like
Zinc It Done Water-Based Galvanizing Spray Paint Aqueous Gal......
EPA/Carb Certificated Fuel Line Fuel Hose for Garden Machine......
100g high performance desiccant in Tyvek
Truck Spare Parts Weichai Engine Intake Rocker Arm Best
Art Glass Smoking Water Pipe ( AY 020)
Pdadmac 40% Cationic Polymer for Sludge Dewatering
Hot-Sale HDI Multilayer Printed Circuit Board Fr4 PCB Power ......
High-End Wall Mounted Storage Holder Rack for Kitchen Goldmi......
Rth -1100A Non Woven Sheet Cutting Machine Sheet Label Cutti......
Non Crosslinked Hyaluronic Acid Meso Filler for Lip Injectio......