Products

Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand

China Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand, Find details about China Manganese Sand, Manganese Sand Filter from Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand

Model NO.
Manganese Sand
Bulk Density
1.85/Cm3
Sio2 Content
17-20%
Fe Content
20%
Trademark
vast clean
Transport Package
25/50kg/Bag or Jumbo Bag
Specification
0.4-0.6mm 0.6-1.2mm 1-2mm 2-4mm 4-8mm 8-16mm 16-32
Origin
China
Model NO.
Manganese Sand
Bulk Density
1.85/Cm3
Sio2 Content
17-20%
Fe Content
20%
Trademark
vast clean
Transport Package
25/50kg/Bag or Jumbo Bag
Specification
0.4-0.6mm 0.6-1.2mm 1-2mm 2-4mm 4-8mm 8-16mm 16-32
Origin
China
Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese SandIntroduction
The manganese sand filter material is made of high-quality natural manganese ore. It has a brown appearance and has a unique effect on removing iron and manganese from groundwater.
 
The appearance of the manganese sand filter is dark brown, nearly round, the main component is manganese dioxide, and the content is between 35%-45%
 
Manganese sand filter material is used to treat groundwater. The process is simple, easy to operate, low engineering cost, long-term stability, service cycle of more than 5 years, easy to manage, can be used to remove harmful iron, manganese, arsenic, etc.  the water quality fully meets the national drinking water standards, and it is a very good groundwater treatment filter material.

Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand

Specification

manganese sand has a lot of different specifications and size (our standard size is 0.4-0.6mm 0.6-1.2mm 1-2mm 2-4mm 4-8mm 8-16mm 16-32),we can also produce according to customers  special requirement
Product specifications:
 
ItemIndexItemIndex
Product nameManganese sand for water treatment and removal fe and MnFormulaMnO2
MnO235-45%Fe20%
Propertiesblack or brown granulerSiO20%-17%
Relative Density3.2-3.6g/cm3Bulk density1.8g/cm3
Moisture<5%SolubilityInsoluble in water and nitric acid, soluble in acetone
Size0.4-0.6mm 0.6-1.2mm 1-2mm 2-4mm 4-8mm 8-16mm 16-32mm

Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese SandNatural manganese sand is a strong oxidant, which can oxidize divalent iron in water. It is often used in drinking water removal iron and manganese filtration devices, and groundwater removal iron and manganese removal water purification equipment.
 
The service life of manganese sand is generally 3 to 5 years for groundwater with high iron concentration, and for groundwater with low iron concentration, the service life is longer, and some have more than ten years. In some natural manganese sand filters, the manganese sand on the upper part of the filter layer will gradually form spherical "rust sand", and the surface of the "rust sand" has a layer of "active filter membrane", which still has the ability to contact catalytic iron removal, so the formation "Rust sand" is not a sign of failure of natural manganese sand. When the length of "rust sand" roughly makes the particle size of the filter material too coarse and affects the effect of iron removal, it is necessary to replace part of the filter material. Therefore, we must pay attention to whether there is "rust sand" in our construction process. If so, we must distinguish the size of "rust sand". If it is a small size, it can continue to be used, which can reduce our industrial costs. , If it is a large specification, it must be replaced to avoid affecting the filtered water quality.
Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand
Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand
Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand
Underground Water Iron Removing, Manganese Removing Manganese Ore 40% Filter Media Manganese Sand

Manganese sand features
1)
If manganese is contained in raw water, anthracite has the demanganization effect.
2)
If the required concentration of free chlorine is detected in raw water, MnO2 H2O (manganese dioxide hydrate) is regenerated through oxidization of manganese in raw water and it coats the surface of manganese sand. Then, it becomes the same as manganese sand. Therefore, the contact oxidation capacity (demanganization capacity) of manganese sand is maintained.
3)
The amount of manganese in our product is contained with 0.3mg/g or more.
4)
Manganese sand can be used for demanganiation with a high-speed filtration system


 

You Might Also Like