Products

4 Gallon Aluminum Air Tank

China 4 Gallon Aluminum Air Tank, Find details about China Viair 480c Compressor, Viair Air Tank from 4 Gallon Aluminum Air Tank

Radiator Core Type
Pipe Belt
Water Temperature Sensor Type
Switch Type
Trademark
ALITA PNEUMATIC
Origin
China
Radiator Core Type
Pipe Belt
Water Temperature Sensor Type
Switch Type
Trademark
ALITA PNEUMATIC
Origin
China
4 Gallon Aluminum Air Tank
4 Gallon Aluminum Air Tank
4 Gallon Aluminum Air Tank
VIAIR 20008 High-Flow Air Source Kit 
High-Flow 200 PSI Air Source Kits come with a powerful, low amp-draw 480C VIAIR compressor mounted on a 200 PSI-rated 2.0 gallon air tank with 5 ports. All 200 PSI Air Source kits come with a pre-wired 165/200 PSI pressure switch. Both kits not only come with the industry's leading 200 PSI compressors but also come with a drain cock, safety valve, 1/2-inch port compression fitting for 3/8-inch air line pre-installed!!!!
To use, simply connect the pressure switch to fused power, make a solid ground and connect an air line to the compression fitting. The use of a 40-amp relay and an appropriately-rated fuse is strongly recommended to preserve the life of the pressure switch.
Why is Viair the Best??
- Industry Leader for 12v Air Systems
-No Maintenance Oil-Less Design Compressors
-Thermal Overload Protection
-High Performance PTFE Rings
-Gearless Direct Drive PMG Motors
-ISO 9001 Certified
200psi Air Compressor (100% Duty @ 100psi)
Use For Air Horns
Use For Load Level Air Springs
Use For Suspension Air Bags
Use For Air Lockers
Use For Tire Inflation
Use For Air Tools
Features:
-  Gearless, direct-drive electric motors
- Oil-less design requires no maintenance (beside filter inspection/replacement)
- High performance, heavy duty PTFE piston ring
- Anodized piston cylinder for increased wear protection
- Precision, high speed, durable bearings for increased piston & motor life
- Sealed motor housing for moisture resistance
- Environmental seals where electrical connections enter motor housing
- Efficient, oversized heat sink head assembly for increased heat dissipation, duty cycle & performance
- High performance check valve eliminates restart pressure on head and piston
- Replacement air filter elements (filtration to 10 microns)
- Heavy duty mounting feet
- Reinforced vibration isolators for safe & quiet operation
- Mounting hardware (bolts, washers, locking washers, nuts)
- Thermal overload protection that protect compressor in event of overheating/over duty cycle operation 
- Maximum operating temperature is 158 F
- Minimum operating temperature is -40 F. 
- Wires terminated with ring ground terminal & spade positive lead terminal
- VIAIR 12 Month Manufacturer Warranty
Specifications:
VIAIR PN: 20008
VIAIR 480c Compressor 
12-Volt
Permanent Magnetic Motor
Duty Cycle: 100% @ 100 PSI (50% @ 200 PSI)
Max. Working Pressure: 200 PSI
Max. Amp Draw: 23 Amps
Dimensions: 19.7"L x 5.9"W x 13.9"H
Kit Includes: 
Pressure Switch(165psi ON - 200psi OFF) 
Compression Fitting for 3/8'' ID Tubing 
Leader Hose with Check Valve 
250psi Safety Valve 
Drain Petcock 
Mounting Hardware 
Tank Fill Rate: 
0 to 200 PSI -----3 Min. 56 Sec. 
165 to 200 PSI -----1 Min. 02 Sec. 
4 Gallon Aluminum Air Tank
4 Gallon Aluminum Air Tank

You Might Also Like