Products

10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear

China 10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear, Find details about China Metal Clad Switchgear, Withdrawable Switchgear from 10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear

Model NO.
GBM
Trademark
GRENO
Transport Package
Wooden Case
Specification
Height: 1.85meters
Origin
Xiamen
Model NO.
GBM
Trademark
GRENO
Transport Package
Wooden Case
Specification
Height: 1.85meters
Origin
Xiamen
Medium Voltage 12KV Metal-Clad Enclosed Switchgear
Model:GBM-12
Voltage: 12Kv  24Kv
Product Overview :
10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear
KYN series metal-clad removable enclosed switch cabinet (called switch cabinet for short). It is applicable for power receiving and distribution in the 3.6-12Kv three-phase AC 50Hz single bus bar and single bus bar sectioning system. It has the functions of controlling, protecting and monitoring the circuit.
10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear10kv, 11kv, 24kv, 33kv Metal Clad Switchgear, Withdrawable Switchgear
Working Conditions:

a. The Ambient temperature upper limit and lower limit are respectively +40°C and -40°C; (allowing storage and transportation at -30°C);
b. Altitude is not more than 1000m;
c. Relative humidity: daily average value should not be more than 95%, while monthly average value should not be more than 90% (+25°C);
d. Seismic intensity should be not more than 8°;
e. Places without fire, explosion risk, serious pollution, chemical corrosion and violent vibration.

Features:

The switch cabinet is metal-clad. Its structure design accords with the standards GB3906-91, IEC298, DL404 and DL402. The crust structure is made of steel plates by means of bending and welding, which are joined by bolts. The hand buggy panel is the door of cabinet. The bosom of switch cabinet is divided into a breaker chamber, a main bus bar chamber, a cable chamber and a relay chamber by metal partitions. The degree of protection of the entire crust and compartments is IP2X equally. All the metal structures are connected to ground reliably. All the compartments of main circuit system have pressure release channels for independent exhaust.

You Might Also Like