Fln48 12/24kv Sf6 Switch Disconnecting

China Fln48 12/24kv Sf6 Switch Disconnecting, Find details about China Switch Disconnecting, Sf6 Switch Disconnecting from Fln48 12/24kv Sf6 Switch Disconnecting

Model NO.
FLBS48
Series
Three
Run
Plug-In
Structure of Operating
Manual
Certification
ISO9001
Product Name
Sf6 Load Break Switch
Certificate
Type Test
Standard
IEC
Application
Grid,Mine,Switchgear Company
Warranty
12months
Life
Around 20years
Trademark
Farady
Transport Package
Seaworthy Wooden Case
Origin
China
HS Code
8535900090
Model NO.
FLBS48
Series
Three
Run
Plug-In
Structure of Operating
Manual
Certification
ISO9001
Product Name
Sf6 Load Break Switch
Certificate
Type Test
Standard
IEC
Application
Grid,Mine,Switchgear Company
Warranty
12months
Life
Around 20years
Trademark
Farady
Transport Package
Seaworthy Wooden Case
Origin
China
HS Code
8535900090
General
FLBS an indoor high-voltage SF6 load switch, an switchgear with the rated voltage of 12kV/24kV, adopted with SF6 gas as an arc-extinguishing and insulation medium, including the three contactors for switching-on and switching-off and to-ground,and is characteristic in its small volume,its convenient installation and operation and its the great adaptability with surroundings.

FLBS of an indoor high-voltage SF6 load switch and FLBS of SF6 load switch plus fuse combination can function to protect and control the electric equipments for power supply and transformer substations especially being suitable for ring net cabinet, cable branch cabinet and distribution switching substation.

FLBS of an indoor high-voltage SF6 load switch and FLBS load switch plus fuse combination are complied with the standards of GB3804-1990, IEC60256-1,1997, GB16926, IEC60420 etc..Fln48 12/24kv Sf6 Switch Disconnecting

Service environment

a) Air temperature

Maximum temperature: +40ºC; Minimum temperature:-35ºC
b) Humidity
Monthly average humidity 95%; Daily average humidity 90% .
c) Altitude above sea level
Maximum installation altitude: 2500m
d) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.
e) No frequent violent shakea) Air temperature

Primary circuit loop of load break switch

Primary loop of FLBS indoor load break switch and its combination is sealed in a epikote casted insulate unit by APG technology, this insulate unit has features of good insulating property, dust and dirts proof, insulate unit contains upper and lower insulate covers, inside charged 0.4bars pressure SF6 gas, the partial siding of lower cover is very thin, it's a protective measure and will burst out in the malfunction, the over pressed gas is released to protect the equipment.

Fln48 12/24kv Sf6 Switch Disconnecting

Arc extinction
FLBS load break switch adopts SF6 gas as the medium of arc extinction, when switch on and off, arc occurs and will spin under the magnetic field effect ion by the permanent magnet, cooled by the SF6 gas and extricated finally.
This indoor SF6 load break switch and its fuse combination works with spring type operating mechanisms A and K,AFL-12D load break switch equipped with the K spring operating mechanism is applied as the incoming control unit, while that equipped with A mechanism is applied as the outgoing protective unit and transformer unit.


1)K" Type Spring Operating Mechanism



Working principle of K type spring operating mechanism is spring press and release ( see fig 1. it's in off position)

A)Earthing operation

Driven by the handle, upper crank arm 4 rotates and presses spring 2 to store energy, when the max energy reached continue rotate the crank arm, the energy storage spring starts to release energy and drive the upper trigger, enables the connecting bar to drive the crank arm, crank arm rotates and drives the moving contactor for earthing.
B)Switch on operation

Driven by the handle, lower crank arm 1 rotates, presses spring 2 to store energy, when the energy released, it drives the trigger 8,enables connecting bar to drive the crank arm, crank arm rotates and drives the moving contactor and load break switch turns on.

C)Switch off operation

Rotate the main shaft crank arm counterclockwise by the handle, release the energy storage spring and the load break switch turns off.



2)"A" Type Spring Mechanism

Working principle of A type mechanism is same as K type, in addition, it has fuse striker unbuckle function. For A type mechanism, electromagnetic unbuckle is also available on customers requirement.(see fig 2)

A)Switch on operation
Driven by the handle, lower crank arm 1 rotates to presse switch on spring 12 and switch off spring 8 at the same time, to provide sufficient energy required by switching off. when the lower crank arm 1 buckles the pin and drives trigger to move, it makes the lower roller wheel unbuckled, and release the switch on spring and load break switch turns on.

B)Switch off operation

Press the switch off button or push the unbuckle pin 2 by the fuse striker, release the spring and load switch turns off.

C)Earthing operation

Earthing operation of A type mechanism is same as that of K type.

3)K type and A type operating mechanism can be operated manually or motorized on request.

***Notice: only when the load break turns off, can turning on and earthing operation be done.Fln48 12/24kv Sf6 Switch Disconnecting

Mechanism interlock

FLBS indoor type medium voltage SF6 load break switch and its fuse combination has below interlocks:

A)When load break switch turns on, earthing operation can't be done

B)When earthing switch turns on, load break switch turns on/off operation can't be done

C)Interlock outlet of mishandling pretension is equipped
Fln48 12/24kv Sf6 Switch Disconnecting
Technical data
Fln48 12/24kv Sf6 Switch Disconnecting
Certification
Fln48 12/24kv Sf6 Switch Disconnecting
Packing and Deliever
Fln48 12/24kv Sf6 Switch Disconnecting

About Us
Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.
We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.
Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.
With ISO9001/14001/18001, we are strike for create value for our partner and customer.
There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.
Fln48 12/24kv Sf6 Switch Disconnecting


Zhejiang Farady Powertech Co.,Ltd
TEL:0086-0577-61512688
Fax:0086-0577-61510628
Http:// faradypowertech.en.made-in-china.com
 
Add: N.O.278,Wei 7 Rd,Yueqing Economic development Zone,Liushi,Yueqing,Zhejiang,P.R.China, 325600